140 GC Motor Grader
The Cat® 140 GC Motor Grader is easy to own and operate. A demand fan and standard Eco mode reduces fuel consumption while open access to maintenance points makes service ...
Engine
- Engine Power (ISO 14396)
- 196hp
- Bore
- 4.1in
- Derating Altitude
- 9842ft
- Displacement
- 427.8in³
- Emissions
- U.S. EPA Tier 4 Final/EU Stage V
- Engine Model
- Cat 7.1
- Engine RPM
- 2,200
- Standard Capability
- 109°F
- High - Ambient Capability
- 122°F
- Maximum Torque - ISO 9249
- 616lb/ft
- Stroke
- 5.3in
- Torque Rise - ISO 9294
- 40%
- Number of Cylinders
- 6
- Note (1)
- Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture.
- Note (2)
- Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
- Note (3)
- Power as declared per ISO 14396
- Engine Power AWD (ISO 14396)
- 196hp
Weights
- Operating Weight - Typically Equipped
- 38725lb
- Note
- *Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment.
Moldboard
- Blade Width
- 12ft
- Arc Radius
- 16.3in
- Blade Height
- 24in
- Cutting Edge Width
- 6in
- End Bit
- 6in
- Throat Clearance
- 4.4in
Dimensions
- Width All Wheel Drive (AWD)
- 99.3in
- Length of Machine*
- 406.7in
- Maximum Height
- 132.4in
- Width
- 95.6in
- Note
- *Typically equipped with push block and ripper.
Blade Range
- Circle Center Shift Left
- 29.6in
- Circle Center Shift Right
- 28.7in
- Maximum Depth of Cut
- 28.1in
- Maximum Lift Above Ground
- 18.7in
- Maximum Shoulder Reach Left
- 74.3in
- Maximum Shoulder Reach Right
- 71.3in
- Moldboard Side Shift Left
- 25.6in
- Moldboard Side Shift Right
- 20.7in
- Blade Tip Range Backward
- 5
- Blade Tip Range Forward
- 40
Service Refill Capacities
- Fuel Tank
- 78gal (US)
- Circle Drive with Slip Clutch
- 2gal (US)
- Circle Drive without Slip Clutch
- 0.5gal (US)
- Cooling System
- 40l
- Engine Crankcase
- 5.5gal (US)
- Diesel Exhaust Fluid Tank (Tier 4 Only)
- 4.2gal (US)
- Hydraulic System
- 11.9gal (US)
- Transmission
- 4.8gal (US)
Weight
- All-Wheel Drive Weight (AWD) (Stage V)*
- 40543lb
- All-wheel Drive Weight (AWD) (Tier 4 Final)**
- 42119lb
- Weight (Tier 4 Final)**
- 40488lb
Air Conditioning System
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas.