TL943 w/Stabilizers Telehandler
The TL943 is a highly versatile machine, designed to deliver maximum performance with traditional Cat reliability, durability and productivity in the toughest working conditions.
Operating Specifications
- Rated Load Capacity
- 9000lb
- Maximum Lift Height
- 43ft
- Load at Maximum Height - Stabilizers Down
- 7000lb
- Maximum Forward Reach
- 31ft
- Load at Maximum Reach - Stabilizers Down
- 2700lb
- Top Travel Speed
- 18mile/h
Engine
- Engine Model
- Cat® C3.6L
- Gross Power - Basic
- 73.7HP
- Gross Power - Premium
- 111HP
- Note
- *Meets U.S. EPA Tier 4 Final emission standards.
Weights
- Operating Weight
- 26852lb
Dimensions
- Height
- 8.16ft
- Width
- 8ft
- Wheel Base
- 11.25ft
- Length - Fork Face
- 20.5ft
- Ground Clearance
- 17in
- Turning Radius - Over Tires
- 12ft
Tires
- Standard
- 370/75-28 Duraforce Air
- Optional (1)
- 370/75-28 Duraforce Foam Fill
- Optional (2)
- 315/95-28 Telemaster Solid
- Optional (3)
- 14.00-24 16PR Air
- Optional (4)
- 14.00-24 12PR Foam
- Optional (5)
- 370/75-28 Non-Marking Air
- Optional
- 370/75-28 Non-Marking Foam
Service Refill Capacities
- Fuel Tank
- 38gal (US)
- Hydraulic Tank
- 49gal (US)
Boom Performance
- Boom Up
- 9.9s
- Boom Down
- 8.5s
- Tele In
- 14.6s
- Tele Out
- 14.5s
- Drawbar Pull - Basic
- 22619lb
- Drawbar Pull - Premium
- 25589lb
Braking System
- Parking Brake
- Spring-applied hydraulic release on front axle
Brakes
- Features
- Service Brakes - inboard wet disc brakes on front and rear axles; Parking Brakes- spring-applied hydraulic release on front axle
Operator Station
- Features
- Vinyl suspension seat, single electronic joystick, spacious interior, ergonomic cab
Instrumentation
- Features
- Volt meter, hourmeter, engine oil pressure gauge, fuel gauge, water temperature gauge
Work Tools
- Pallet Forks - Option 2
- [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
- Cubing Forks
- [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
- Pallet Forks - Option 1
- [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
- Carriages - Dual Fork Positioning
- 50in
- Carriages - Swing
- 100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung)
- Carriages - Side Shift
- 50in
- Lumber Forks - Option 1
- [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
- Carriages - Standard Tilt
- 50in
- Pallet Forks - Option 3
- [2] 1829 mm, 60 mm × 150 mm ([2] 72 in, 2.36 in × 6 in)
Operator Station
- Intuitive Control Layout
All day operator comfort and efficiency is ensured through our simple, logical control layout.
- Easier Access
Cab entry and exit is both easier and more convenient due to the well placed handholds.
- Operator Protection
The machine provides full operator security with OROPS or EROPS protection.
- Enhanced Visibility
The TL-Series cab has improved visibility due to the use of advanced virtual design techniques.
Ease of Operation
- Joystick Control
The joystick allows three simultaneous boom functions and operates the auxiliary hydraulic function. It allows the option of a second auxiliary service for the use of work tools that require more than one hydraulic service.
- Flow Sharing
Three simultaneous hydraulic functions are achieved using a full flow sharing hydraulic valve. A load sensing variable displacement pump allows full hydraulic power even at low revs.
Performance
- Lift Height
The TL943 can effectively pick and place materials to a maximum height of 43 ft. (13.1 m).
- Reach
Job site obstacles present challenges demanding a machine to place loads at greater distances - the TL943 delivers.
- Maneuverability
The TL943 offers improved maneuverability, allowing it to work productively in confined areas.
- Steering Modes
The TL943 offers three steering modes (two wheel, crab and circle steer) to allow an operator to more easily position the machine. Steering modes are selected by a single three-position rocker switch. Steering position sensors are fitted as standard to all steering modes to be changed while moving.
Power Train
- Transmission
The TL943 features a Cat PG145 power-shift transmission.
Versatility
- Quick Coupler
A manual IT quick coupler is standard on the TL-Series machines. For optimum versatility, an optional hydraulic quick coupler is available, allowing the operator to more easily change non-hydraulic work tools without leaving the cab.
- Work Tools
A wide range of work tools are available to meet most job site applications. Caterpillar Telehandler Work Tools extend the versatility of the machine. Built for performance and durability, these work tools deliver high productivity, long life and excellent value.
- General Purpose Bucket (1.0 m3/1.3 yd3)
- Light Materials Bucket (2.0 m3/2.6 yd3, 2.5 m3/3.25 yd3, 3.0 m3/3.90 yd3)
- Material Handling Bucket (1.5 m3/1.95 yd3)
- Multi Purpose Bucket (1.0 m3/1.3 yd3)
- Grapple Bucket (0.85 m3/1.1 yd3)
- Fixed Carriage
- Rotate Carriage
- Sideshift Carriage
- Pallet Forks
- Block Forks
- Lift Hook
- Truss Boom
- Self-tipping Hopper
- Material Handling Arm
Contact your Cat dealer for additional work tool options.
- Tires
A wide range of tire options enables the machine to be configured to achieve optimum job site performance, including foam-filled and non-marking tires.
Cost of Ownership
- Ease of Access
Cost of ownership starts with ease of service. All Cat Telehandler service points are accessible and major components are at ground level due to overall machine design.
- Daily Maintenance
Routine daily maintenance is now reduced to checking fluid levels and a walkaround inspection.
- Service Intervals
Engine oil, filter changes and routine lubrication are now only required every 500 hours.
- Reduced Componentry
With the reduction in the number of filters and extended service intervals, operating costs are the lowest in the industry.
- Equipment Protection Plan
Designed to enhance your telehandler ownership experience with comprehensive coverage and peace of mind.
Serviceability and Customer Support
- Access
All Cat Telehandler service points, including the combined transmission/hydraulic oil filter, are accessible and major components are at ground level due to the overall machine design. A cab mounted service point allows access to the fuel fill, hydraulic oil fill, washer bottle, fuse box and cab air filter for routine checks.
- Selection
Make detailed comparisons before you buy. Your Cat Dealer can give you precise answers to your questions.
- Purchase
Look at the value that the TL943 telehandler will offer you. Consider all the flexible financing options your Cat Dealer offers as well as day to day operating costs.
- Operation
Improving operating techniques can boost your profits. Your Cat Dealer has literature and other tools to help increase your productivity.
- Replacement
Repair, rebuild or replace? Your Cat Dealer can help you evaluate the cost involved so you can make the right choice.
- Product Support
You will find high availability of parts at our Dealer parts counter. Cat Dealers utilize a worldwide computer network to find in-stock parts to minimize machine downtime. Additionally, Caterpillar offers a line of genuine remanufactured components which can help lower repair costs.
- Easy Financing
Your Cat Dealer can provide a financing package to meet your needs.