815 Soil Compactor
Cat Soil Compactors are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to operate more efficiently ...
Engine
- Gross Power (SAE J1995:2014)
- 284hp
- Net Power (SAE J1349:2011)
- 249hp
- Net Power (ISO 9249:2007)
- 249hp
- Engine Power (ISO 14396:2002)
- 275hp
- Emissions
- Option 1 - U.S. EPA Tier 4 Final/EU Stage V
- Engine Model
- Cat® C7.1
- Rated Speed
- 2200r/min
- Torque Rise
- 52%
- Note (1)
- Net power available at flywheel when the engine is equipped with fan, air cleaner, aftertreatment, and alternator with engine speed at 2,200 rpm.
- Emissions
- Option 2 - Brazil MAR-1, emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA
- Rated Speed
- 2200 r/min
- Net Power - ISO 9249:2007
- 249hp
- Gross Power - SAE J1995:2014
- 286hp
- Peak Torque ( 1,400 rpm )
- 749lbf·ft
- Torque Rise
- 26%
- Note (2)
- Net power available at the flywheel when the engine is equipped with fan, air cleaner, muffler, and alternator with engine speed at 2,200 rpm.
- Bore
- 4.1in
- Stroke
- 5.3in
- Displacement
- 427.8in³
- High Idle Speed
- 2270r/min
- Low Idle Speed
- 800r/min
- Maximum Altitude - Without Derating
- 9842.5ft
Operating Specifications
- Operating Weight (Tier 4 Final/Stage V)
- 49652lb
- Operating Weight (Tier 3/Stage IIIA equivalent)
- 49013lb
Transmission
- Transmission Type
- Cat Planetary Power Shift
- Travel Speeds - Forward - First
- 3.9mile/h
- Travel Speeds - Forward - Second
- 6.7mile/h
- Travel Speeds - Forward - Third
- 11.3mile/h
- Travel Speeds - Reverse - First
- 4.5mile/h
- Travel Speeds - Reverse - Second
- 7.7mile/h
- Travel Speeds - Reverse - Third
- 11.4mile/h
Hydraulic System - Lift/Tilt
- Lift/Tilt System - Circuit
- Pilot operated Load Sensing valve with EH
- Lift/Tilt System
- Variable displacement piston
- Maximum Flow at 2,200 rpm
- 23.5gal/min
- Relief Valve Setting - Lift/Tilt
- 3190psi
- Cylinders, Double Acting: Lift, Bore, Stroke
- 101.6 mm x 627 mm (4.0 in x 24.7 in)
- Cylinders, Double Acting: Left and Right Tilt, Bore, Stroke
- 101.6 mm x 167 mm (4.0 in x 6.6 in)
- Pilot System
- Open center, fixed displacement gear
- Pilot Relief Valve Setting
- 3046psi
Hydraulic System - Steering
- Steering System - Circuit
- Pilot, Load Sensing
- Steering System - Pump
- Piston – Variable Displacement
- Maximum Flow at 2,200 rpm
- 38.8gal/min
- Relief Valve Setting - Steering
- 4003psi
- Total Steering Angle
- 84°
- Steering Cycle Times - High Idle
- 3s
- Steering Cycle Times - Low Idle
- 8.2s
Service Refill Capacities
- Fuel Tank
- 132.1gal (US)
- Diesel Exhaust Fluid Tank
- 4.2gal (US)
- Cooling Systems - Tier 4 Final/EU Stage V
- 21.4gal (US)
- Cooling System - Tier 3/Stage IIIA Equivalent
- 19.3gal (US)
- Engine Crankcase
- 5.3gal (US)
- Transmission
- 14.8gal (US)
- Differential - Final Drives - Front
- 17.2gal (US)
- Differential - Final Drives - Rear
- 17.2gal (US)
- Hydraulic Tank Only
- 19.8gal (US)
- Note
- Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl ester) * • 100% renewable diesel, H
Axles
- Front
- Planetary – Fixed
- Rear
- Planetary – Oscillating
- Oscillation Angle
- ±10
Braking System
- Service Brakes
- Single Disc Wet (Enclosed) 2 WHL
- Parking Brake
- Drum and Shoe, Spring Applied, Hydraulic Released
Air Conditioning System
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system con
Sound Performance - Tier 4 Final / Stage V
- Operator Sound Pressure Level (ISO 6396:2008)
- 72dB(A)
- Machine Sound Power Level (ISO 6395:2008)
- 112dB(A)
- Machine Sound Power Level (ISO 6395:2008)***
- 109dB(A)
- Operator Sound Pressure Level (ISO 6396:2008)*,***
- 70dB(A)
- Machine Sound Power Level (ISO 6395:2008)**
- 107dB(A)
- Note (1)
- * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
- Note (2)
- ** European Union Directive “2000/14/EC” as amended by “2005/88/EC.” and UK Noise Regulation 2001 No. 1701
- Note (3)
- ***Sound suppression equipped
- Note (4)
- The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 100 percent of the maximum engine cooling fan speed.
- Note (5)
- The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 100 percent of the maximum engine cooling fan speed.
- Note (6)
- Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Blades
- Capacity
- 2.69yd³
- Overall Width
- 12.3ft
- Height
- 2.8ft
- Digging Depth
- 0.7ft
- Ground Clearance
- 2.6ft
- Maximum Tilt
- 1.1ft
- Turning Radius - Outside Corner of Blade
- 21.1ft
- Turning Radius - Inside Face of Pusharm
- 8.3ft
- Weight
- 1764lb
- Total Operating Weight
- 49652lb
Sound Performance - Tier 3 / Stage IIIA
- Operator Sound Pressure Level (ISO 6396:2008)
- 72dB(A)
- Machine Sound Power Level (ISO 6395:2008)
- 112dB(A)
- Operator Sound Pressure Level (ISO 6396:2008)***
- 70dB(A)
- Machine Sound Power Level (ISO 6395:2008)***
- 110dB(A)
- Note (1)
- ***Sound suppression equipped
- Note (3)
- The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 100 percent of the maximum engine cooling fan speed.
- Note (2)
- The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 100 percent of the maximum engine cooling fan speed.
- Note (4)
- Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Wheels
- Weight
- 9720lb
- Outside Diameter
- 55.6in
- Drum Diameter
- 40.5in
- Drum Width
- 39in
- Tips per Row
- 12
- Tips per Wheel
- 60
- Replaceable
- Weld On
- Width - Over Drums
- 127.7in
- Width Between Drums
- 49.6in
- Tip Height
- 7.5in
Dimensions (Approximate)
- Height - Top of Beacon
- 12.9ft
- Height - Top of Cab Roof
- 12ft
- Height - Top of Exhaust Pipe
- 11.1ft
- Height - Top of Hood
- 8.6ft
- Height to Top of Radiator Guard
- 7.9ft
- Ground Clearance to Hitch
- 1.2ft
- Ground Clearance to Transmission Guard
- 1.2ft
- Ground Clearance to Bottom of Bumper
- 2.2ft
- Centerline of Rear Axle to Bumper
- 6.5ft
- Hitch to Centerline of Front Axle
- 5.5ft
- Wheel Base
- 11ft
- Width over Platform
- 10.3ft
- Height to Top of GPS Antenna
- 12.1ft
OPERATOR COMFORT AND CONTROL
- Improved ingress/egress with an improved cab with flip up armrest.
- Keep your operators informed about machine conditions and operation with VIMS™ 3G machine monitoring system.
- Safety and visibility enhanced with standard rearview camera.
- Preferred temperature settings maintained with automatic climate control.
- Premium plus seat with leather finish containing forced air heating and cooling, two-way thigh adjustment, power lumbar and back bolster adjustment, and dynamic end dampening.
- Improved comfort with low operator sound levels.
- Improved spectator sound levels and optional low sound packages.
TOP-TIER SERVICE AND SUPPORT
- Easier access and in a controlled environment; electronics bay is located inside the cab.
- Focused on safety with ground level or platform access to most major components.
- Ground level: emergency shutdown, battery disconnect, and jump start.
- Quick visual inspection and minimize fluid contamination with sight gauges for coolant, transmission, and hydraulic oil.
- Electronic air inlet restriction indicator.
- Designed for ease of service and inspection.
– Hydraulic oil cooler, fuel cooler, and condenser grouped together
– Centralized grease points - Operators and technicians can resolve any problems before failure using Vital Information Management System (VIMS).
POWERFUL EFFICIENCY
- Powerful, responsive Cat® 7.1 engine is designed for maximum fuel economy and increased power density.
- Reliable performance and low emissions.
- High productivity with optional four-way tilting blade.
- Two engine options available that meet U.S. EPA Tier 4 Final and EU Stage V emission standards or U.S. EPA Tier 3 and EU Stage IIIA equivalent.
- For the Tier 4 Final and Stage V option, the Cat Clean Emissions Module contains a diesel oxidation catalyst, diesel particulate filter, and Cat Regeneration System, utilizing SCR technology.
- Regeneration is completely automatic and does not interrupt the machine’s work cycle.
- Experience maximum responsiveness and control with Steering and Transmission Integrated Control System (STIC™).
- Conserve more fuel with the automatic engine and electrical system shutdown.
- Achieve greater momentum on grades and fuel savings by carrying that momentum through the shift points with the all new Advanced Productivity Electronic Control System (APECS) transmission controls.
- Operators experience less fatigue with throttle lock to maintain engine speed and reduce fuel burn.
PRODUCTIVITY WITH TECHNOLOGY
- Optional Cat Compact 3D mapping technology combines advanced compaction measurement, in-cab guidance, and reporting capabilities to help you consistently meet compaction targets fast, uniformly, and in fewer passes – saving on fuel and the cost of unnecessary rework.
- Cat Compaction Control with Machine Drive Power (MDP) is an energy-based measurement system that correlates compaction with rolling resistance to provide an indication of soil stiffness.
- Link technology (standard) provides access to machine location, hours, fuel consumption, idle time, events, and diagnostic codes through the online VisionLink® interface.
OPTIMIZE COMPACTION
- Chevron tamping tip design provides greater ground pressure, more compaction, excellent traction, and a smooth ride.
- Symmetrical tamping tip pattern results in equal compaction in forward or reverse. Tips are full perimeter and replaceable. The tip is welded to a base assembly, then welded directly to the drum.
- Each wheel has two cleaner bars to keep the drums free of carryover dirt, regardless of rolling direction so efficiency is maximized.
- The adjustable cleaner bar tips (standard or abrasive type) are heat-treated and direct-hardened cutting edge steel to increase wear life, which translates into lower operating costs.