D2 Dozer

Engine

Engine Model

Cat® C3.6

Power - Net

92hp

Displacement

220in³

Net Power - 2,200 rpm - SAE J1349

92hp

Net Power - 2,200 rpm - ISO 9249/EEC 80/1269

92hp

Note (1)

Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the ?ywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.

Power Train

Hydrostatic

Note (2)

All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.

Weights

Operating Weight

18382lb

Operating Weight

18382lb

Operating Weight - LGP

19066lb

Note (2)

For machine with ripper, add 554 kg (1,222 lb).

Note (1)

Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.

Transmission

Drive Pumps

1

Maximum Travel Speed - Forward

5.6mile/h

Relief Valve Settings

7033psi

Maximum Travel Speed - Reverse

6.2mile/h

Track Motors

2

Hydraulic Controls

Pump Output

17.2gal/min

Relief Valve Settings

2988psi

Ripper

Type

Parallelogram

Number of Shanks

3

Height

6.5in

Weight

1222lb

Maximum Digging Depth

13.3in

Maximum Ground Clearance Under Tip

17.6in

Overall Width

67.3in

Maximum Reach - Ground Line

30.2in

Dimensions

Note

With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)

BLADE: Digging Depth - LGP

23.2in

BLADE: Blade Cutting Edge Angle, Adjustable - LGP

52° to 58°

BLADE: Blade Lift Height - LGP

27.9in

BLADE: Blade Width - LGP

124in

BLADE: Blade Width at Maximum Angle - LGP

113.1in

Track Gauge - LGP

67.9in

Ground Clearance - LGP

13in

BLADE: Blade Height - LGP

35.8in

Overall Length - With Blade - LGP

168.2in

BLADE: Blade Capacity (SAE) - LGP

2.42yd³

BLADE: Maximum Tilt - LGP

17.2in

BLADE: Maximum Angle (either side) - LGP

25°

BLADE: Maximum Angle (either side) - Standard

25°

Ground Clearance - Standard

13in

Overall Length - With Blade - Standard

168.5in

Note

Abrasion Undercarriage

BLADE: Blade Cutting Edge Angle, Adjustable - Standard

52° to 58°

BLADE: Maximum Tilt - Standard

15.2in

Track Gauge - Standard

61in

BLADE: Digging Depth - Standard

23.3in

BLADE: Blade Width - Standard

109.5in

BLADE: Blade Lift Height - Standard

29.3in

BLADE: Blade Capacity (SAE) - Standard

2.59yd³

BLADE: Blade Width at Maximum Angle - Standard

100.1in

BLADE: Blade Height - Standard

39.8in

Length of Basic Dozer (without blade) - Standard

129.5in

Width of Dozer (standard shoes, no blade) - LGP

92.9in

Dozer Height - Standard

108.9in

Dozer Height - LGP

108.9in

Width of Dozer (standard shoes, no blade) - Standard

79.1in

Length of Basic Dozer (without blade) - LGP

129.5in

Cab

FOPS

ISO 3449:2005 Level II

ROPS

ISO 3471:2008

Undercarriage

Length - Track on Ground - LGP

89in

Track Gauge

61in

Number of Rollers - Each Side

7

Track Gauge - LGP

68in

Ground Pressure - LGP

4.3psi

Shoe Width - Standard

18in

Shoe Width - LGP

25in

Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage

43

Number of Shoes - Each Side - Abrasion Undercarriage

38

Ground Pressure

5.7psi

Length of Track on Ground

89in

Service Refill Capacities

Fuel Tank

51.5gal (US)

Crankcase - With Filter

2.8gal (US)

Final Drive - Each - LGP

2.6gal (US)

Cooling System

5gal (US)

Transmission - Hydraulic Tank

23.8gal (US)

Final Drives - Each Side

2.6gal (US)

Diesel Exhaust Fluid (DEF) Tank

4.9gal (US)

Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the ?uorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

Retrieval Winch

Throat Clearance

5.6in

Winch Length

35.63in

Drum Diameter

8in

Drum Width

9.65in

Overall width

27.91in

Control

Hydraulic

Maximum Line Pull - Bare Drum

32150lb

Speed

Variable

Maximum Line Pull - Full Drum

20350lb

Drum Capacity - Recommended Cable

277ft

Rope Diameter - Optional

0.75in

Winch Drive

Hydraulic

Rope Diameter - Recommended

0.63in

Drum Capacity - Optional Cable

195ft

Weight

1747lb

Maximum Line Speed - Bare Drum

50ft/min

Maximum Line Speed - Full Drum

79ft/min

High Performance Winch

Maximum line pull – bare drum

40000lb

Drum capacity – recommended cable

371ft

Winch length

27.76in

Overall width

29.2in

Control

Hydraulic

Maximum line speed – bare drum

131ft/min

Maximum line speed – full drum

207ft/min

Drum width

10.8in

Drum capacity – optional

256ft

Throat clearance

6.75in

Weight

1345lb

Rope diameter – recommended

0.63in

Speed

Variable

Maximum line pull – full drum

25000lb

Drum diameter

10in

Rope diameter – optional

0.75in

Winch drive

Hydrostatic