D3 Track-Type Tractor

Engine

Engine Model

Cat® C3.6

Power - Net

104hp

Displacement

220in³

Net Power - 2,200 rpm - ISO 9249/EEC 80/1269

104hp

Note (1)

Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the ?ywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.

Power Train

Hydrostatic

Note (2)

All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.

Net Power - 2,200 rpm - SAE J1349

104hp

Weights

Operating Weight

20639.68lb

Operating Weight

20640lb

Operating Weight - LGP

21369lb

Operating Weight - LGP, 762 mm/30 in

21810lb

Note (2)

For machine with ripper, add 554 kg (1,222 lb).

Note (1)

Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.

Transmission

Drive Pumps

1

Maximum Travel Speed - Forward

5.6mile/h

Maximum Travel Speed - Reverse

6.2mile/h

Track Motors

2

Relief Valve Settings

7033psi

Hydraulic Controls

Pump Output

17.2gal/min

Relief Valve Settings

2988psi

Ripper

Type

Parallelogram

Number of Shanks

3

Height

6.5in

Weight

1222lb

Maximum Digging Depth

13.3in

Maximum Reach - Ground Line

30.2in

Overall Width

67.3in

Maximum Ground Clearance Under Tip

17.6in

Service Refill Capacities

Diesel Exhaust Fluid (DEF) Tank

4.9gal (US)

Cooling System

5gal (US)

Final Drive - Each - LGP

2.6gal (US)

Crankcase - With Filter

2.8gal (US)

Transmission - Hydraulic Tank

23.8gal (US)

Fuel Tank

51.5gal (US)

Final Drives - Each Side

2.6gal (US)

Dimensions

Dozer Height - LGP

109in

Length of Basic Dozer (without blade) - LGP, 762 mm (30 in)

128.7in

Width of Dozer (standard shoes, no blade) - Standard

83in

Dozer Height - LGP, 762 mm (30 in)

109in

Length of Basic Dozer (without blade) - LGP

128.7in

Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in)

103.5in

Width of Dozer (standard shoes, no blade) - LGP

94.9in

Dozer Height - Standard

109in

Length of Basic Dozer (without blade) - Standard

128.7in

Note

With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)

BLADE: Blade Width - LGP

126.7in

Track Gauge - LGP, 762 mm (30 in)

73in

BLADE: Digging Depth - LGP

23.2in

Track Gauge - LGP

67.9in

BLADE: Blade Capacity (SAE) - LGP

3.06yd³

BLADE: Blade Width at Maximum Angle - LGP

115.8in

BLADE: Blade Cutting Edge Angle, Adjustable - LGP

52° to 58°

Ground Clearance - LGP, 762 mm (30 in)

13in

BLADE: Blade Height - LGP

39.8in

BLADE: Blade Lift Height - LGP

30.2in

Ground Clearance - LGP

13in

Overall Length - With Blade - LGP, 762 mm (30 in)

169.6in

Overall Length - With Blade - LGP

169.6in

BLADE: Maximum Tilt - LGP

17.7in

BLADE: Maximum Angle (either side) - LGP

25°

BLADE: Blade Capacity (SAE) - Standard

2.86yd³

Track Gauge - Standard

63in

BLADE: Digging Depth - Standard

23.8in

BLADE: Blade Lift Height - Standard

30.2in

Ground Clearance - Standard

13in

Overall Length - With Blade - Standard

170.7in

BLADE: Blade Cutting Edge Angle, Adjustable - Standard

52° to 58°

BLADE: Blade Height - Standard

42.2in

BLADE: Maximum Tilt - Standard

15.8in

Note

Abrasion Undercarriage

BLADE: Blade Width - Standard

109.5in

BLADE: Blade Width at Maximum Angle - Standard

103.8in

BLADE: Maximum Angle (either side) - Standard

25°

Cab

ROPS

ISO 3471:2008

FOPS

ISO 3449:2005 Level II

Undercarriage

Shoe Width - Standard

20in

Ground Pressure - LGP

4.5psi

Track Gauge - LGP

69in

Length - Track on Ground - LGP

91in

Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage

40

Ground Pressure - LGP, 762 mm (30 in)

3.9psi

Length - Track on Ground - LGP, 762 mm (30 in)

91in

Shoe Width - LGP

26in

Shoe Width - LGP, 762 mm (30 in)

30in

Track Gauge

63in

Number of Rollers - Each Side

7

Track Gauge - LGP, 762 mm (30 in)

73in

Ground Pressure

5.7psi

Length of Track on Ground

91in

Number of Shoes - Each Side - Abrasion Undercarriage

36

Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the ?uorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

Retrieval Winch

Drum Capacity - Optional Cable

195ft

Rope Diameter - Optional

0.75in

Control

Hydraulic

Maximum Line Pull - Bare Drum

32150lb

Maximum Line Speed - Full Drum

79ft/min

Drum Capacity - Recommended Cable

277ft

Winch Drive

Hydraulic

Weight

1747lb

Maximum Line Pull - Full Drum

20350lb

Rope Diameter - Recommended

0.63in

Maximum Line Speed - Bare Drum

50ft/min

Speed

Variable

Winch Length

35.63in

Drum Diameter

8in

Overall width

27.91in

Drum Width

9.65in

Throat Clearance

5.6in

High Performance Winch

Winch length

27.76in

Rope diameter – optional

0.75in

Maximum line speed – bare drum

131ft/min

Maximum line pull – bare drum

40000lb

Weight

1345lb

Drum capacity – optional

256ft

Maximum line speed – full drum

207ft/min

Rope diameter – recommended

0.63in

Winch drive

Hydrostatic

Throat clearance

6.75in

Drum diameter

10in

Overall width

29.2in

Drum width

10.8in

Maximum line pull – full drum

25000lb

Speed

Variable

Drum capacity – recommended cable

371ft

Control

Hydraulic