304 Mini Excavator
The Cat® 304 Mini Excavator delivers power and performance in a compact size to help you work in a wide range of applications.
Engine
- Net Power
- 45hp
- Engine Model
- C1.7 Turbo
- Gross Power - 2,400 rpm - SAE J1995:2014
- 48.4hp
- Bore
- 3.3in
- Emissions
- Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
- Stroke
- 3.9in
- Displacement
- 101in³
- Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC
- 45hp
- Note
- Net power advertised is the power available at the flywheel when the engine is at rated speed and rated power when the engine is installed with the factory configured fan, air intake system, exhaust system, and alternator with a minimum alternator load.
Weights
- Operating Weight
- 9867lb
- Minimum Operating Weight with Canopy*
- 8655lb
- Maximum Operating Weight with Canopy**
- 9647lb
- Note (2)
- **Maximum Weight is based on steel tracks, operator, full fuel tank, long stick, straight blade, extra counterweight and no bucket.
- Note (1)
- *Minimum Weight is based on rubber tracks, operator, full fuel tank, standard stick, straight blade, no bucket and no extra counterweight.
- Maximum Operating Weight with Cab**
- 9867lb
- Minimum Operating Weight with Cab*
- 8875lb
Dimensions - Long Stick
- Dig Depth
- 138.2in
- Maximum Blade Depth
- 18.7in
- O/A Shipping Height
- 100in
- Maximum Dump Clearance
- 147.2in
- Stick Length
- 66.7in
- Maximum Dig Height
- 201.8in
- Maximum Reach - Ground Level
- 214.4in
- Track Width
- 66.9in
- Tail Swing with Counterweight
- 51.2in
- Swing Bearing - Height
- 21.9in
- Boom Height - Shipping Position
- 75.2in
- Boom Swing - Left
- 20.9in
- Maximum Reach
- 219.3in
- Boom In Reach
- 92.1in
- Boom Swing - Right
- 28.7in
- Track Belt/Shoe Width
- 13.8in
- Vertical Wall
- 99.8in
- Maximum Blade Height
- 16.5in
- Note
- *Overall Shipping Length depends on blade position during shipment.
- Overall Shipping Length*
- 194.9in
- Ground Clearance
- 12in
- O/A Undercarriage Length
- 87in
- Tail Swing without Counterweight
- 47.4in
Sustainability
- Recyclability
- 96%
Weight Increase from Minimum Configuration
- Steel Tracks
- 430lb
- Counterweight
- 496lb
- Angle Blade
- 243lb
- Long Stick
- 66lb
Travel System
- Ground Pressure - Minimum Weight
- 4.2psi
- Maximum Traction Force - Low Speed
- 7329lbf
- Travel Speed - Low
- 2.2mile/h
- Ground Pressure - Maximum Weight
- 4.9psi
- Travel Speed - High
- 3.2mile/h
- Maximum Traction Force - High Speed
- 4271lbf
- Gradeability - Maximum
- 30 degrees
Service Refill Capacities
- Cooling System
- 2.9gal (US)
- Engine Oil
- 1.6gal (US)
- Hydraulic System
- 17gal (US)
- Fuel Tank
- 17gal (US)
- Hydraulic Tank
- 14gal (US)
Hydraulic System
- Operating Pressure - Travel
- 3553psi
- Auxiliary Circuit - Secondary - Pressure
- 3553psi
- Digging Force - Stick - Long
- 4316lbf
- Auxiliary Circuit - Secondary - Flow
- 7gal/min
- Pump Flow at 2,400 rpm
- 25gal/min
- Operating Pressure - Swing
- 2611psi
- Auxiliary Circuit - Primary - Flow
- 21gal/min
- Auxiliary Circuit - Primary - Pressure
- 3553psi
- Note
- Flow and pressure are not combinable. Under load, as flow rises pressure goes down.
- Type
- Load Sensing Hydraulics with Variable Displacement Piston Pump
- Digging Force - Stick - Standard
- 4721lbf
- Digging Force - Bucket
- 8588lbf
- Operating Pressure - Equipment
- 3553psi
Swing System
- Boom Swing - Right
- 50 Degrees
- Machine Swing Speed
- 9r/min
- Boom Swing - Left
- 78 Degrees
Blade
- Angle Blade Height
- 14.2in
- Straight Blade Height
- 14.2in
- Straight Blade Width
- 66.9in
- Angle Blade Width
- 66.9in
- Angle Blade - Right
- 25 Degrees
- Angle Blade - Left
- 25 Degrees
Certification - Cab and Canopy
- Roll Over Protective Structure (ROPS)
- ISO 12117-2:2008
- Top Guard
- ISO 10262:1998 (Level I)
- Tip Over Protective Structure (TOPS)
- ISO 12117:1997
Sound
- Average Exterior Sound Pressure (ISO 6395:2008)
- 97dB(A)
- Operator Sound Pressure (ISO 6396:2008)
- 76dB(A)
- Note
- European Union Directive “2000/14/EC”
Dimensions - Standard Stick
- Maximum Reach - Ground Level
- 204.7in
- Vertical Wall
- 94.3in
- Note
- *Overall Shipping Length depends on blade position during shipment.
- Tail Swing with Counterweight
- 51.2in
- Boom In Reach
- 88.8in
- Dig Depth
- 126.4in
- Maximum Dig Height
- 198.4in
- Maximum Blade Height
- 16.5in
- Swing Bearing - Height
- 21.9in
- Boom Swing - Left
- 20.9in
- Stick Length
- 54.9in
- O/A Undercarriage Length
- 87in
- Track Belt/Shoe Width
- 13.8in
- Boom Height - Shipping Position
- 63.8in
- Boom Swing - Right
- 28.7in
- Maximum Dump Clearance
- 143.5in
- Ground Clearance
- 12in
- Maximum Reach
- 209.8in
- O/A Shipping Height
- 100in
- Tail Swing without Counterweight
- 47.4in
- Maximum Blade Depth
- 18.7in
- Overall Shipping Length*
- 194.9in
ALL DAY COMFORT
- Choose either a canopy (not available in some regions) or a sealed and pressurized cab which can be equipped with air conditioning, adjustable wrist rests, and a suspension seat to help keep you working comfortably all day long.
EASY TO OPERATE
- Controls are easy to use and the intuitive Next Generation LCD monitor provides easy to read machine information. An advanced touchscreen monitor can also be equipped as an upgrade option.
STICK STEER TRAVEL MODE
- Moving around the job site is even easier with the Cat Stick Steer option. Easily switch from traditional travel controls with levers and pedals to joystick controls to move the machine and to operate the blade. The benefit of less effort and improved control is in your hands!
BIG PERFORMANCE IN A SMALL MACHINE
- Strong lift and dig performance helps you get the job done faster. The reduced radius tail swing design provides exceptional stability and performance. With a maximum width of 1700 mm (67 in), the 304 can access those hard to get into areas. Dozer float allows for easy clean up. An angle blade is also an option for finished grading and easier backfilling applications.
SAFETY ON THE JOB SITE
- Your safety is our top priority. The Cat mini excavator is designed to help keep you safe on the job. Courtesy work lights and a fluorescent retractable seat belt are just a couple of the safety features we’ve built into the machine.
SIMPLE SERVICE FOR LESS DOWNTIME
- Maintenance is quick and easy on the Cat mini excavator. Routine check points are easy to access at ground level through the side doors.
LOWER OPERATING COSTS
- Equipped with features such as auto idle, auto engine shutdown, and efficient hydraulics with a variable displacement pump, the Cat mini excavator was designed with reducing your operating costs in mind.
SUSTAINABILITY
- The Cat® C1.7 engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
- Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
- Auto Idle helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
- Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
- Cruise control helps you maintain a constant speed as you travel across your jobsite saving fuel and reducing greenhouse gas emissions.
- The Cat® Seat Belt Reminder provides audible and visual warnings to remind operators to buckle up during machine operation. The easy-to-install system is compatible with all equipment brands to help ensure operator safety.
- Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
- Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.(if equipped)
- Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.(if equipped)
- Cat Grade with advanced 2D and 3D technologies combine advanced guidance with optional automated machine control helping you reach grading targets while reducing fuel burn and greenhouse gas emissions by improving efficiency, job site productivity, and accuracy. (if equipped).
*Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel. (for use of blends higher than 20% biodiesel, consult your Cat dealer)
