New Cat 272D3 Skid Steer Loader For Sale In OK & TX

Home | New Equipment | CAT Machines | Skid Steer and Compact Track Loaders | 272D3 Skid Steer Loader

272D3 Skid Steer Loader

360° Exterior View (HTML5)

The Cat® 272D3 Skid Steer Loader, with its long wheel base and vertical lift design, delivers extended reach and lift height for quick and easy truck loading. Its stability and ...

Request a Quote

PDF Print

Engine

Gross Power - SAE J1995: 98hp
Net Power - SAE 1349: 95hp
Displacement: 232in³
Stroke: 4.7in
Bore: 3.9in
Engine Model: Cat C3.8 DIT (turbo)
Net Flywheel Power: 95hp
Peak Torque - 1,500 rpm - SAE J1995: 246ft·lbf
Net Power - ISO 9249: 96hp

Operating Specifications

Rated Operating Capacity: 3450lb
Tipping Load: 6900lb
Breakout Force - Tilt Cylinder: 7443lb
Breakout Force - Lift Cylinder: 6074lb
Rated Operating Capacity with Optional Counterweight: 3690lb
Note: Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 850 CCA batt

Weights

Operating Weight: 9133lb
Note: Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 850 CCA batt

Dimensions

Wheel Base: 54.6in
Height - Top of Cab: 82.4in
Vehicle Width over Tires: 72in
Ground Clearance: 8.9in
Departure Angle: 27°
Maximum Dump Angle: 51°
Bucket Pin Reach - Maximum Lift: 14.7in
Bucket Pin Height - Maximum Lift: 127.1in
Turning Radius from Center - Machine Rear: 74.7in
Reach - Maximum Lift/Dump: 30.3in
Bumper Overhang - Behind Rear Axle: 46.2in
Length - Without Bucket: 127.6in
Maximum Overall Height: 160.1in
Turning Radius from Center - Coupler: 58.3in
Maximum Reach - With Arms Parallel to Ground: 50.5in
Clearance at Maximum Lift and Dump: 96in
Length - With Bucket on Ground: 155.7in
Bucket Pin Height - Carry Position: 7.8in
Turning Radius from Center - Bucket (racked): 89.8in
Rack Back Angle - Maximum Height: 84°
Note: Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 850 CCA batt
Roll Back Angle: 28°

Cab

ROPS: ISO 3471:2008
FOPS: ISO 3449:2005 Level I

Service Refill Capacities

Cooling System: 4.1gal (US)
Engine Crankcase: 3.5gal (US)
Fuel Tank: 31.7gal (US)
Hydraulic System: 14.5gal (US)
Hydraulic Tank: 10.3gal (US)
Chain Box - Each Side: 2.7gal (US)
Diesel Exhaust Fluid (DEF) Tank: 5gal (US)

Hydraulic System

Hydraulic Flow - Standard - Loader Hydraulic Flow: 23gal/min
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated): 76hp
Hydraulic Flow - Standard - Hydraulic Power (Calculated): 44hp
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow: 32gal/min
Hydraulic Flow - Standard - Loader Hydraulic Pressure: 3335psi
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure: 4061psi

Power Train

Travel Speed - Forward or Reverse - One Speed: 6.6mile/h
Travel Speed - Forward or Reverse - Two Speed Option: 9.4mile/h

Air Conditioning System (if equipped)

Air Conditioning: The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

Noise Level

Outside Cab**: 102 dB(A)
Note (2): *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee
Note (1): Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Inside Cab*: 83 dB(A)
Note (3): **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.

Quiet and Comfortable

The industry leading sealed and pressurized cab option provides the operator with a cleaner and quieter operating environment with excellent work tool visibility. Continuing the industry leading trend, the D3 Series also includes as standard, seat mounted adjustable joystick controls for operator comfort.

Maximum Performance

High performance power train provides maximum performance and production capability through the Electronic Torque Management system, standard two speed travel and an electronic hand/foot throttle with decel pedal capability.

Making Your Job Easier

Cat® “Intelligent Leveling” system provides industry leading technology, integration, and available features such as dual direction self level, work tool return to dig, and work tool positioner.

Optimized Machine Capability

Maximize machine capability and control with the available Advanced Display, providing on-screen adjustments for implement response, hystat response and creep control. Also features multi-language functionality with customizable layouts, security system and rearview camera.

A Smooth Ride

A standard, Speed Sensitive Ride Control system improves operation on rough terrain, enabling better load retention, increased productivity and greater operator comfort. (Photo shown may vary from machine referenced.)

Sustainability

The Cat® C3.8 engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 7% biodiesel FAME (fatty acid methyl ester). Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
Cat® Extended Life Coolant and long-life HYDO Advanced hydraulic fluids not only reduce downtime but help decrease the amount of fluid and filters that are replaced over the life of the machine.
Boost productivity with Cat technologies like work tool positioner, return to dig, and Cat Smart Attachments.
Save fuel and reduce your greenhouse gas emissions with efficiency features such as foot throttle pedal and cooling system demand fan.

Standard Equipment:

Electrical

12 volt Electrical System
100 ampere Alternator
Ignition Key Start/Stop Switch
Lights: Gauge Backlighting, Two Rear Tail Lights, Two Rear Halogen Working Lights, Two Adjustable Front Halogen Lights, Dome Light
Backup Alarm
Heavy Duty Battery, 850 CCA

Operator Environment

Gauges: Fuel Level, DEF Level, Hour Meter
Operator Warning System Indicators: Air Filter Restriction, Alternator Output, Armrest Raised/Operator Out of Seat, Engine Coolant Temperature, Engine Oil Pressure, Air Inlet Heater Activation, Hydraulic Filter Restriction, Hydraulic Oil Temperature, Park Brake Engaged, Engine Emission System
Adjustable Vinyl Seat
Fold In Ergonomic Contoured Armrest
Control Interlock System, when operator leaves seat or armrest raised: Hydraulic System Disables, Hydrostatic Transmission Disables, Parking Brake Engages
ROPS Cab, Open, Tilt Up
FOPS, Level I
Top and Rear Windows
Floor Mat
Interior Rearview Mirror
12 volt Electric Socket
Horn
Hand (Dial) and Foot Throttle, Electronic with Decel Feature
Adjustable Joystick Controls
Advanced Display with Rearview Camera: Full Color, 127 mm (5 in) LCD Screen, Advanced Multi-operator Security System, On-screen Adjustments for Implement Response, Hystat Drive Response and Creep Control
Storage Compartment with Netting

Power Train

Cat C3.8, Turbo Diesel Engine, Meeting Tier 4 Final and Stage V Emission Standards
Air Cleaner, Dual Element, Radial Seal
S·O·SSM Sampling Valve, Hydraulic Oil
Filters, Cartridge-type, Hydraulic
Filters, Canister-type, Fuel and Water Separator
Radiator/Hydraulic Oil Cooler (side-by-side)
Spring Applied, Hydraulically Released Parking Brakes
Hydrostatic Transmission
Four Wheel Chain Drive

Other

Engine Enclosure, Lockable
Extended Life Antifreeze, –37° C (–34° F)
Machine Tie Down Points (6)
Support, Lift Arm
Hydraulic Oil Level Sight Gauge
Radiator Coolant Level Sight Gauge
Radiator, Expansion Bottle
Cat ToughGuard^™ Hose
Auxiliary, Hydraulics, Continuous Flow
Heavy Duty, Flat Faced Quick Disconnects with Integrated Pressure Release
Split D-Ring to Route Work Tool Hoses Along Side of Left Lift Arm
Electrical Outlet, Beacon
Belly Pan Cleanout
Variable Speed Demand Fan
Product Link^™ PL240, Cellular

Mandatory Equipment

Hydraulics, Standard or High Flow XPS
Quick Coupler, Mechanical or Powered
High Visibility Seat Belt, 50 mm (2 in) or 75 mm (3 in)
Power Train: One Speed, Two Speed or Two Speed with Speed Sensitive Ride Control
Tires, 12 × 16.5 or 14 × 17.5
PERFORMANCE PACKAGE (must select one of the following):
– Performance Package H1: Standard Flow Hydraulics (No Self Level)
– Performance Package H2: Standard Flow, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, and Electronic Snubbing (Raise and Lower)
– Performance Package H3: High Flow XPS, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, and Electronic Snubbing (Raise and Lower)
COMFORT PACKAGE (must select one of the following):
– Open ROPS (C0): Static Seat (No Foot Throttle, Headliner, Heater or Door)
– Open ROPS (C1): Foot Throttle, Headliner, Cup Holder, and choice of Seat (Mechanical Suspension or High Back, Heated, Air Ride Seat) (No Heater or Door)
– Enclosed ROPS with Heater (C2): Foot Throttle, Headliner, Heater and Defroster, Side Windows, Cup Holder, Radio Ready, choice of Seat (Mechanical Suspension or High Back, Heated, Air Ride Seat) and Door (Glass or Polycarbonate)
– Enclosed ROPS with A/C (C3): C2 + Air Conditioner