275 XE Compact Track Loader
Engine
- Gross Power - SAE J1995
- 122hp
- Bore
- 4.7in
- Displacement
- 221in²
- Net Power - ISO 9249
- 120hp
- Net Power - SAE 1349
- 82hp
- Peak Torque at 1,360 rpm SAE J1995
- 370lb/ft
- Peak Torque - 1,500 rpm - SAE J1995
- 406lb/ft
- Stroke
- 3.9in
- Engine Model
- Cat® C3.6 TA (turbocharged after-cooled)
Operating Specifications
- Rated Operating Capacities - 35% Tipping Load
- 2823lb
- Breakout Force - Lift Cylinder
- 6422lb
- Breakout Force - Tilt Cylinder
- 9963lb
- Ground Contact Area - With 450 mm/17.7 in Track
- 2808in²
- Ground Pressure - With 450 mm/17.7 in Track
- 4.5psi
- Rated Operating Capacities - 50% Tipping Load
- 4033lb
- Rated Operating Capacity with Optional Counterweight
- 2996lb
- Tipping Load
- 12015lb
Weights*
- Operating Weight
- 12705lb
- Counterweight Adds to Operating Weight
- 428lb
- Counterweight Adds to Operating Weight - ROC (35%)
- 279lb
- Counterweight Adds to Operating Weight - Tip Load
- 796lb
- Enclosed Cab Adds to Operating Weight
- 218lb
- Enclosed Cab Adds to Operating Weight - ROC (35%)
- 105lb
- Enclosed Cab Adds to Operating Weight - Tip Load
- 214lb
- Operating Weight - ROC (35%)
- 4205lb
- Operating Weight - ROC (50%)
- 6008lb
- Operating Weight - Tip Load
- 12015lb
- Note
- * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed (variable), 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, triple flange front/rear idler, XE (H6) hydraulics with rear a
Dimensions
- Bucket Pin Height - Carry Position
- 8.1in
- Bucket Pin Height - Maximum Lift
- 134.4in
- Bucket Pin Reach - Maximum Lift
- 16.3in
- Clearance at Maximum Lift and Dump
- 106.1in
- Departure Angle
- 29.5°
- Ground Clearance
- 11in
- Height - Top of Cab
- 87.8in
- Length - Track on Ground
- 72.3in
- Length - With Bucket on Ground
- 152.8in
- Length - Without Bucket
- 128in
- Maximum Overall Height
- 165.1in
- Maximum Reach - With Arms Parallel to Ground
- 46.1in
- Overall Length - Track
- 92.2in
- Rack Back Angle - Maximum Height
- 86.7°
- Reach at Maximum Lift/Dump
- 32in
- Roll Back Angle
- 27.3°
- Turning Radius from Center - Bucket (racked)
- 91.3in
- Turning Radius from Center - Coupler
- 60.3in
- Turning Radius from Center - Machine Rear
- 76in
- Vehicle Width (450 mm/17.7 in tracks)
- 77.8in
- Maximum Dump Angle
- 44.7°
Cab
- FOPS
- ISO 3449:2005 Level I
- ROPS
- ISO 3471:2008
- FOPS Level II
- ISO 3449:2005 Level II (Optional)
Service Refill Capacities
- Cooling System
- 4.6gal (US)
- Engine Crankcase
- 2.4gal (US)
- Fuel Tank
- 36.9gal (US)
- Hydraulic System
- 10.8gal (US)
- Hydraulic Tank
- 6.9gal (US)
- Diesel Exhaust Fluid (DEF) Tank
- 2.9gal (US)
Power Train
- Travel Speed - Forward or Reverse - One Speed
- 5.2mile/h
- Travel Speed - Forward or Reverse - Two Speed
- 7.8mile/h
Hydraulic System
- Hydraulic Flow - XE - Maximum Loader Hydraulic Pressure
- 4496psi
- Hydraulic Flow - High Flow - Loader Hydraulic Flow
- 34gal/min
- Hydraulic Flow - XE - Maximum Loader Hydraulic Flow*
- 40gal/min
- Hydraulic Flow - High Flow - Loader Hydraulic Pressure
- 3500psi
- Hydraulic Flow - XE - Hydraulic Power (calculated)
- 103.9hp
- Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)
- 80.7hp
- Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow
- 23gal/min
- Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure
- 4061psi
- Hydraulic Flow - Standard - Hydraulic Power (Calculated)
- 46.4hp
- Hydraulic Flow - Standard - Loader Hydraulic Flow
- 23gal/min
- Hydraulic Flow - Standard - Loader Hydraulic Pressure
- 3500psi
Dimensions*
- Vehicle Width (400 mm/15.7 in tracks)
- 75.8in
Redesigned Operator Station
- Redesigned Operator Station
Larger operating environment and combined with additional seat travel, providing more space for operators of any size.
Available ventilated and heated high-back air ride seat
- Available ventilated and heated high-back air ride seat
Greater operator comfort.
High-performance power train
- High-performance power train
Standard two-speed travel, combined with the optional Speed Sensitive Ride Control system for operation on rough terrain, enabling better load retention and increased productivity.
XE Hydraulic system
- XE Hydraulic system
Highest flow and highest pressure delivering great hydraulic horsepower to efficiently run even the most power-hungry attachments.
Electronically controlled Cat C3.6TA (turbocharged, aftercooled) engine
- Electronically controlled Cat C3.6TA (turbocharged, aftercooled) engine
Maximum horsepower across a wide RPM range and providing high torque for increased working performance, no matter the application.
Standard equalizer bar (E-bar) undercarriage and standard two-speed travel
- Standard equalizer bar (E-bar) undercarriage and standard two-speed travel
Hybrid undercarriage solution delivers the benefits of a rigid style undercarriage design when lifting heavy loads or when using heavy attachments while also providing the benefits of an oscillating undercarriage design.
Advanced Touchscreen Monitor
- Advanced Touchscreen Monitor
Offers cutting-edge functionality and control that includes an integrated radio, Bluetooth® connectivity, and multi-camera (side-view) option, and supports 32 different language choices.
Advanced Joysticks
- Advanced Joysticks
Delivers unmatched control of machine functions and adjustments without operators having to remove their hands from the controls.
Ground-level access
- Ground-level access
For all daily service and routine maintenance points help reduce machine downtime for greater productivity.
Cat Attachments
- Cat Attachments
Make your Cat Compact Track Loader the most versatile machine on the job site.