637 Wheel Tractor-Scraper
Tractor Engine
- Flywheel Power - Tractor/Scraper
- 570hp
Scraper Bowl
- Scraper Capacity - Heaped
- 34yd³
Transmission
- Top Speed - Loaded
- 34.7mile/h
Dimensions
- Front of Tractor to Front Axle
- 142.2in
- Axle to Vertical Hitch Pin
- 20in
- Wheel Base
- 346.8in
- Rear Axle - Rear of Machine
- 90.2in
- Length - Maximum (Push-Pull)
- 655.1in
- Width - Overall Machine
- 155in
- Width - Rear Tire Centers
- 96.9in
- Extended Push Block (Push-Pull)
- 108in
- Width - Outside Rear Tires
- 143.2in
- Width - Inside of Bowl
- 134in
- Height - Scraper Blade Maximum
- 20in
- Ground Clearance - Tractor
- 26.1in
- Width - Tractor
- 137.8in
- Length - Overall Machine - Standard
- 597in
- Height - Overall Shipping
- 163.2in
- Height - Top of Cab
- 147in
General
- Scraper Capacity - Struck
- 24yd³
- Width - Cut
- 11.5ft
- 180° Curb-to-Curb Turning Width
- 40.12ft
- Fuel Tank Refill Capacity - Scraper
- 370gal (US)
- Scraper Capacity - Heaped
- 34yd³
- Overall Width
- 12.93ft
- Top Speed - Loaded
- 34.7mile/h
- Overall Shipping Height
- 13.62ft
- Maximum Depth of Cut
- 17.7in
- Tires - Tractor
- 37.25R35**E3
- Maximum Depth of Spread
- 21.1in
- Tires - Scraper
- 37.25R35**E3
- Rated Load
- 37 200 kg (82,200 lb); 37.2 tonnes (41.1 tons)
Engine
- Rated Engine RPM - Tractor
- 1900r/min
- Engine Model - Scraper
- Cat C9.3
- Engine Model - Tractor
- Cat C18
- Flywheel Power - Scraper
- 290hp
- Rated Engine RPM - Scraper
- 2150r/min
- Flywheel Power - Tractor
- 570hp
- Emissions
- Cat C9.3 and C18 engines meet U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Service Refill Capacities
- Hydraulic System
- 37.5gal (US)
- Crankcase - Tractor
- 13.7gal (US)
- Diesel Exhaust Fluid - Tractor
- 8gal (US)
- Diesel Exhaust Fluid - Scraper
- 5.8gal (US)
- Transmission System - Scraper
- 12.9gal (US)
- Fuel Tank
- 370gal (US)
- Cooling System - Scraper
- 16.1gal (US)
- Crankcase - Scraper
- 6.5gal (US)
- Cooling System - Tractor
- 19.8gal (US)
- Transmission System - Tractor
- 29gal (US)
Non Push-Pull
- Operating Weight - Empty
- 114950lb
- Overall Length
- 49.34ft
Push-Pull
- Overall Length - With Bail Down
- 54.59ft
- Operating Weight - Empty
- 119060lb
Cab
- Exterior Sound Level
- The exterior sound power level for the standard machine (ISO 6393) is 116 dB(A).
- ROPS/FOPS
- ROPS/FOPS meet “ISO Standards.”
Safety Criteria Compliance Standards
- Reverse Alarm
- ISO 9533:2010
- Brakes
- ISO 3450:2011
- Falling Object Protective Structure (FOPS)
- ISO 3449:2005 Level II
- Rollover Protection Structure (ROPS)
- ISO 3471:2008 for up to 21 282 kg (46,919 lb)
- Seat Belt
- SAE J386:FEB2006
- Steering System
- ISO 5010:2007
Travel Speeds - Runout
- Transmission Gear - Reverse
- 6.2mile/h
- Transmission Gear - Second
- 6.2mile/h
- Transmission Gear - First
- 3.4mile/h
- Transmission Gear - Seventh
- 25.7mile/h
- Transmission Gear - Sixth
- 19mile/h
- Transmission Gear - Fourth
- 10.5mile/h
- Transmission Gear - Third
- 7.7mile/h
- Transmission Gear - Fifth
- 14.1mile/h
- Transmission Gear - Eighth
- 34.7mile/h
Implement Cycle Times
- Bail Lower
- 2.1s
- Apron Lower
- 3.8s
- Apron Raise
- 4s
- Bowl Lower
- 3.5s
- Bowl Raise
- 3.5s
- Ejector Retract
- 8.5s
- Bail Raise
- 1.5s
- Ejector Extend
- 8.5s
Be More Productive
- Be More Productive
- Advanced productivity electronic control system (APECS) allows the engine and transmission to communicate on a high level. This communication allows the machine to better utilize the power and torque the engine is producing. The net result is moving more material.
- Use ground speed control to set the desired top speed and the machine will find the gear that works best for the engine and the transmission, providing a lower fuel burn.
- The machine speed limit feature replaces top gear selection, allowing the machine to find the correct gear that works best for the engine and transmission. Pulling the load in the correct gear, in most cases, results in a lower engine load factor and lower fuel burn.
- Auto-stall assists in quickly bringing the transmission to an operating temperature at startup when the machine is working in a cold climate region.
- Cat Payload Estimator for scrapers is an earthmoving solution for optimal payload and job site efficiency. Payload Estimator achieves on-the-go weighing by using bowl lift cylinder pressure during the loaded haul segment. Payload Estimator is optimized to be used with sequence assist, which provides increased productivity with less operator effort. Payload Estimator is an automatic feature when ordered with sequence assist.
Work in Comfort
- Work in Comfort
• Reduce up to 14 individual operator commands per cycle with sequence assist (optional attachment).
• Steer with less effort using the newly designed high-pressure
steering system.
• Enjoy interior improvements and a more ergonomic work environment with a 21% larger cab than the G Series cab.
• Intuitive, ergonomic controls keep operators focused on their work.
• Maintain desired cab temperature with automatic temperature control.
Designed for Safety
- Designed for Safety
• Get in and out of the cab easier with the new powered access ladder system (optional attachment).
• Enhance an operator’s awareness of site surroundings with the optional work area vision system (WAVS).
• Seat belt indicator provides visual and audible alerts when the seat
belt is not in use.
• Advanced cushion hitch allows the cushion hitch to prevent end stroke by having the ability to predict end stroke events and manage the rate of dampening, resulting in reduced hitch maintenance and improved operator ride in rough conditions.
• Easy ground-level access to fuel, water, and engine oil.
Easy to Operate
- Easy to Operate
• The spacious cab features easy, intuitive controls and excellent
visibility. The cab provides a comfortable working environment for
all-day operation.
• Cat advanced ride management (ARM) seat suspension reduces
end stroke movement of the load cylinder for a smoother ride.
• Engine overspeed protection will automatically engage with no
operator input when the machine is in eighth gear. The machine will assist in slowing the machine speed by canceling the throttle command and engaging the engine compression brake.
Integrated Cat Technologies
- Integrated Cat Technologies
• Monitor, manage, and enhance job site operations.
• Hit target grade faster and more accurately with Cat Grade
technologies. Finish jobs in fewer passes and with less operator
effort, saving you time and helping to increase profit.
• Product Link™ collects machine data that can be viewed online
through web and mobile applications (optional attachment).• Access information anytime, anywhere with VisionLink®– useit to make informed decisions that boost productivity, lower costs, simplify maintenance, and improve the safety and security of your job site.
• Shorten the learning curve for inexperienced operators with load
assist (optional attachment).
Execute Efficiency
- Execute Efficiency
• The new tractor hydraulic on-demand fan helps assist in lower fuel
consumption.
• Using draft-arm overflow guards diverts material away from the
bowl, preventing material from getting caught between the draft
arms and the bowl sides.
• Cat Grade Control (optional attachment) intelligently ensures the
machine does not cut below grade in a cut area or overfill in the
fill area.