New 3412C | 800 kVA 50Hz Generator Set For Sale In OK & TX

3412C | 800 kVA 50Hz Generator Set

360° Exterior View

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

Request a Quote

PDF Print

Generator Set Specifications

Maximum Rating: 680 kVA
Minimum Rating: 680 kVA
Emissions/Fuel Strategy: Low Fuel Consumption
Voltage: 380 to 415 Volts
Frequency: 50 Hz
Speed: 1500 rpm
Duty Cycle: Standby, Prime

Engine Specifications

Engine Model: 3412C TA, V-12, 4-Stroke Water-Cooled Diesel
Bore: 5.4in
Stroke: 6in
Displacement: 1648.86in
Compression Ratio: 13:01
Aspiration: Turbocharged, Air to Air Aftercooled
Fuel System: Pump and Lines
Governor Type: ADEM™ A5

Generator Set Dimensions

Length - Maximum: 162.4in
Width - Minimum: 75in
Width - Maximum: 78.3in
Height - Maximum: 75in
Dry Weight - Genset (minimum): 12039lb
Dry Weight - Genset (maximum): 13030lb

Cat Generator Set Package

Cat generator set packages have been fully prototype tested
Accepts 100% block load in one step and meets NFPA 110 loading requirements
Conform to ISO 8528-5 steady state and transient response requirements

Cat Diesel Engine

Reliable, rugged, durable design
Field-proven in thousands of applications worldwide
Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight

SR500 Alternator

Superior motor starting capability minimizes need for oversizing alternator
Designed to match performance and output characteristics of Cat diesel engines
Robust Class H insulation

EMCP 4 Control Panel

User-friendly interface and navigation
Scalable system to meet a wide range of installation requirement
Expansion modules and site-specific programming for specific customer requirements

Cooling System

Designed to operate in standard ambient temperatures up to 50°C (122°F)
Contact your Cat Dealer for specific ambient and altitude capabilities

Certifications

EU Declaration of Conformity
EU Declaration of Incorporation
Eurasian Conformity (EAC)

One Safe Source

Components used in the generator set are selected based on seamless design integration to provide the optimum performance
The generator set is fully assembled at a Caterpillar facility following our quality guidelines
Each generator set package is tested before leaving the Caterpillar facility
Cat product support, including dealer service, parts and warranty covers the entire Cat power system

World Wide Product Support

Cat dealers have over 1,800 dealer branch stores operating in 200 countries
Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements

Standard Equipment:

Air Inlet System

Air cleaner, single element canister type with service indicator

Control Panel

GCCP Control panel
DC volts
Environmental sealed front face
kVA (per phase, average & percent)
Voltage adjust
Compatible with the following optional modules:
Low coolant level
RPM
Engine cycle crank
Over/under frequency (81 o/u)
Programmable protective relaying functions:
kVAr (per phase, average & percent)
coolant temperature
Local annunciator
Reverse reactive power (kVAr) (32RV)
2 Programmable digital outputs
Emergency stop
Amps (per phase & average)
Volts (L-L & L-N)
Failure to start (overcrank)
Speed adjust
24 Volt DC operation
Remote Serial annunciator
kW (per phase, average & percent)
Low coolant temperature
High coolant temperature
Over/under voltage (27 / 59)
Reverse power (kW) (32)
Run/auto/ stop/control
Operating hours
Customer data link (Modbus RTU)
Power factor (per phase & average)
Generator temperature monitoring module
6 programmable digital inputs
Overspeed
Text alarm/event descriptions
4 programmable relay outputs (Form A)
kW-hr (total)
Features include:
Remote CAN annunciator
Digital I/O module
Generator phase sequence
Low oil pressure
Warning/shutdown with common LED indication of shutdowns for:
Accessory module data link
Emergency stop pushbutton
Serial annunciator module data link
Frequency (Hz)
2 Programmable relay outputs (Form C)
Oil pressure (psi, kPa or bar)
Digital indication for:
Communications
Overcurrent (50 / 51)

Cooling System

Caterpillar extended life coolant
Coolant level shutdown
Radiator with guard (Sized for 50 degrees C)
Fan and belt guards
Coolant drain line with valve, piped to edge of base

Exhaust System

Stainless steel exhaust flex with ANSI style outlet flange, gasket, bolts and mating weld flange, shipped loose

Fuel System

Water seperator
Flexible fuel lines terminated on base
Primary and Secondary fuel filters
Fuel priming pump

Generator And Attachments

Class H insulation
2:1 Volts/Hz
3-phase sensing
Class F temperature rise
12 Leads
VR6 voltage regulator
Busbar termination
Reactive droop
SR4B self excited

Governing System

Cat electronic governor

Lube System

Lubricating oil
Oil drain line with valve, piped to edge of base
Fumes disposal, piped to front of radiator
Oil filter

Mounting System

Base, formed steel with linear vibration isolators between base and engine-generator

Starting / Charging System

45 amp Charging alternator
Fuel shutoff solenoid
Battery with rack, cables
24 volt starting motor

Optional Equipment:

Air Inlet System

Heavy duty air cleaners
Open element air cleaners
Dual element air cleaners

Circuit Breakers

1600 Amp, 3 pole, Non-UL, 100% rated, 24 volt DC shunt trip
1250, 1600 Amp, 3 pole, IEC 100% rated, 24 volt DC shunt trip