3516B Generator Set

Standard Equipment:

Air Inlet System

• Air cleaner; single element canister type

Cooling

• Package mounted radiator

Exhaust

• Exhaust flange outlet

Fuel

• Primary fuel filter with integral water separator
• Secondary fuel filters
• Fuel priming pump

Generator

• IP23 Protection
• Matched to the performance and output characteristics of Cat engines

Power Termination

• Busbar

Control Panel

• Cat ECS Genset controller

General

• Paint - Caterpillar yellow except rails and radiators gloss black

Control Panels

• Speed adjust
• Text alarm/event descriptions
• Generator set packages include Caterpillar's voltage regulator
• Auto/start/stop control
• 24 Volt DC operation
• Cat ECS 100
• Generator mounted - Rear facing
• Controls:
• Environmental sealed front face
• Engine cool-down timer
• Emergency stop pushbutton
• Limiter and exciter diode monitor
• Engine cycle crank
• Lamp test
• Alarm acknowledge
• Customizable screens
• PLC functionality
• Load histogram feature
• 0 True RMS AC metering, 3-phase, +/-2% accuracy
• Operating hours
• Digital indication for:
• DC volts
• RPM
• Coolant temperature
• Amps (per phase & average)
• Oil pressure (psi, kPa or bar)
• Volts (L-L & L-N)
• Frequency (Hz)
• Power factor (per phase & average)
• kW (per phase, average & percent)
• High coolant temperature
• Low oil pressure
• Warning/shutdown with common LED indication of shutdowns for01/10/2018:
• kVAr (per phase, average & percent)
• kVA (per phase, average & percent)
• kVAr (per phase, average & percent)
• Emergency stop
• Overspeed
• Failure to start (overcrank)
• Programmable protective relaying functions:
• Low coolant temperature
• Generator phase sequence
• Low coolant level
• 1 Programmable digital outputs
• Gear type lube oil pump
• Battery disconnect switch
• Caterpillar yellow with high gloss black rails and radiator
• NEMA Class H insulation system, Class H temperature rise at 40C ambient (125C prime / 150C standby)
• Medium voltage: Form wound - Permanent magnet excitation (PMG) - Winding temperature detectors - NEMA Class H insulation system, Class H temperature rise at 40C ambient (125C prime / 150C standby) - Busbar connections, right side extension box, bottom cable entry - NEMA standard hole pattern
• Fumes disposal
• Permanent magnet excitation (PMG)
• NEMA Class H insulation system, Class H temperature rise at 40C ambient (125C prime / 150C standby)
• Permanent magnet excitation (PMG)
• NEMA standard hole pattern
• Reverse reactive power (kVAr) (32RV)
• Over/under voltage (27/59)
• NEMA Class H insulation system, Class H temperature rise at 40C ambient (125C prime / 150C standby)
• Permanent magnet excitation (PMG)
• Class H insulation, Class F temperature rise at 40C ambient (105C prime / 130C standby)
• Permanent magnet excitation (PMG)
• SAE standard rotation
• Internal excitation (IE)
• Flexible fuel lines - shipped loose
• IVR includes reactive droop capability, 3-phase voltage sensing, KVAR/PF modes, RFI suppression, min / max exciter
• Busbar connections, right side extension box, bottom cable entry
• Medium voltage:
• Communications:
• NEMA standard hole pattern
• Lubricating oil
• Oil drain lines and valve
• 3 Phase brushless, Salient pole
• 24 Volt electric starting motor
• 6 Customer programmable digital inputs
• Dry exhaust manifold
• Accessory module data link
• ADEM A3
• Form wound
• ATAAC - 3516E package radiators shipped installed
• Busbar connections, top center mounted, top cable entry
• High voltage:
• 4 Programmable relay outputs (Form A)
• Anti-condensation space heater
• NEMA Class H insulation system, Class H temperature rise at 40C ambient (125C prime / 150C standby)
• Controls: Speed adjust - Auto/start/stop control - Engine cool-down timer - Engine cycle crank - Alarm acknowledge - Lamp test - Load histogram feature - PLC functionality - Customizable screens -0 True RMS AC metering, 3-phase, +/-2% accuracy
• NEMA standard hole pattern
• 45 Amp Charging alternator
• 3 Analog inputs
• Random wound
• Anti-vibration mounts (shipped loose)
• Cat connect
• Oil filter, filler and dipstick
• Rails - Engine/generator/radiator mounting
• Customer data link (Modbus RTU)
• Flywheel and flywheel housing - SAE No. 00
• English
• Busbar connections, right side extension box, bottom cable entry
• Serial annunciator module data link
• Integral lube oil cool
• Certified standard PGS provided
• Winding temperature detectors
• 1 Programmable relay outputs (Form C)
• Reverse power (kW) (32)
• Form wound - Permanent magnet excitation (PMG)
• Right hand servicing
• Overcurrent (50/51)
• 6 Lead
• Flanged faced outlet(s)
• Low voltage:
• Number of I/O varies on options selected
• Battery and battery rack w/cables
• Over/under frequency (81 o/u)
• Fuel cooler; not included with packages without radiator
• Busbar connections, right side extension box, bottom cable entry
• Rubber anti-vibration mounts - shipped loose
• NEMA standard hole pattern

Optional Equipment:

Control System

• EMCP 4.4

Air Inlet System

• Single element filter
• Dual element air cleaner

Exhaust

• Exhaust mufflers

Generator

• Permanent magnet excitation (PMG)
• Internal excitation (IE)
• Anti-condensation heater
• Oversize and premium generators

Cooling System

• Water level switch gauges
• Standard ambient radiators
• Coolant
• Standard ambient ATAAC radiators
• Optional installed ATAAC radiators
• Air inlet protection including air shut off magnetic switch
• Optional installed radiator

Power Termination

• Circuit breakers, IEC compliant
• Circuit breakers, UL listed

Control Panels

• Generator temperature monitoring & protection
• Remote monitoring software
• Load share module
• Digital I/O module

Exhaust System

• Exhaust Offset
• Flanges
• Elbows
• Y Adapters
• Flange and exhaust expanders
• Clean emission parets
• Mufflers
• Flexible fittings

Fuel System

• Primary fuel filter

General

• Special paint
• US aid emblem
• Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
• EEC Declaration of Conformity
• Integral & sub-base fuel tanks
• Enclosures: Sound attenuated, weather protective
• Integral & sub-base UL listed dual wall fuel tanks
• EU Certificate of Conformance (CE)
• The following options are based on regional and product configuration:
• Automatic transfer switches (ATS)
• UL 2200 package

Mounting

• Rubber anti-vibration mounts
• Spring type vibration isolators
• IBC isolators

Generators And Attachments

• Generator conversions - IE and PM
• 380, 440, 480, 600 Volts, 3 phase, 1800 rpm, RW, PM, No. of leads: 6, Picth: 0.6667 - 1600 Frame
• 380, 440, 480, 600 Volts, 3 phase, 1800 rpm, RW, IE, No. of leads: 6, Picth: 0.6667 - 1600 Frame
• 380, 416, 440, 480, 600, 2400, 4160 Volts, 3 phase, 1800 rpm, RW, PM, No. of leads: 6, Picth: 0.6667 - 1600 and 1800 Frames
• Alternator air cleaner
• Space heater

Intrumentation

• Pyrometer and thermocouples

Lube System

• Prelube pump groups
• Oil lever regulator
• Lube oil

Starting/charging

• Battery chargers
• Air starting motor with control and silencer
• Heavy duty starting system
• Oversize batteries
• Charging alternator

Crankcase Systems

• Crankcase protection group: No explosion relief valves; Explosion relief valves
• Crankcase ventilation system

Mounting System

• Spring type vibration isolators
• IBC vibration isolators
• Puck style low efficiency isolators

Power Connections

• Neutral ground connections
• Center post busbarss
• Right, left side and rear power connections
• Grounding groups

Special Tests / Reports

• Standard engine test charge
• IBC Certification
• Special package tests: PGS Test report @ 1.0 and 0.8 power factors
• Generator set test report
• CSA Certification
• Torsional vibration analysis TVA report
• Fuel consumption test

Starting / Charging Sytem

• Jacket water heaters