CG170-12 Gas Generator Set
Generator Set Specifications
- Continuous Rating
-
1200 ekW @1.0pf
- Fuel Type
-
Natural Gas, Biogas, Coal Gas
- Maximum Electrical Efficiency
-
43.40%
- Frequency
-
50 or 60 Hz
- RPM
-
1500 rpm
Engine Specifications
- Engine Model
-
CG170-12
- Displacement
-
3240in³
- Aspiration
-
TA
- Bore
-
6.7in
- Stroke
-
7.7in
Generator Set Dimensions
- Length
-
235in
- Width
-
70in
- Height
-
87in
- Dry Weight - Genset
-
28659.8lb
High Efficiency, Lower Operating Costs
- Miller cycle timing with combustion chamber and spark plug improvement help on saving up to 15% fuel gas per year
- CG170 (non-miller) is optimized for Island-Mode capability
- Gearbox helps limit wear and tear on engine components, lowering operating costs and increasing availability
Low installation, Building and Operating Costs
- Extended maintenance intervals up to 64,000 Oh
- Low fuel consumption due to improved combustion chamber and pre-chamber spark-plugs
- Flexible fields of application also with fluctuating gas qualities due to Total Electronic Management (TEM)
- Optimized oil management
Optimized Lubrication Consumption
- Consumes up to 1900 liter less lube oil per year than comparable models<li>
- Longer lubricant change and oil change intervals<li>
Standard Equipment:
- Air Inlet
-
- Turbocharger with a water-cooled bearing case for all cylinder
- One-element single-stage air cleaner with enclosure and sevice indicator
- Control Panels
-
- TEM (Total Electronic Management)
- Cooling
-
- Electrical jacket water and aftercooler coolant pump
- Jacket water and SCAC thermostats
- flange connections for JW inlet and outlet
- Exhaust
-
- PEARL/Low resistence exhaust system
- Closed crankcase ventilation system
- Exhaust waste gate for the CG170-12
- Fuel System
-
- Electronic fuel metering valve
- Independently controlled cylinder monitoring and ignition system
- Pre-chamber spark plugs
- Generator
-
- Winding temperature detectors
- Reactive droop
- 3-phase sensing and KVAR/PF control
- Anti-condensation space heater
- closed-coupled generator result in no torque transmission to the base frame
- Busbar connections
- grid code generator
- Starting/charging
-
- 24V starting motors
- Battery disconnect switch
- General
-
- Crankshaft vibration damper and guard
Optional Equipment:
- Grid Code Compliance
-
- 50Hz: Germany, Belgium, Great Britain, Italy, Poland, and Netherlands
