Cat C32 Auxiliary / Diesel Electric Propulsion Engine (IMO III)

Cat C32 Auxiliary / Diesel Electric Propulsion Engine (IMO III)

PDF Print Share

Power Rating

Minimum Rating
1047BHP
Maximum Rating
1332BHP

Engine Specifications

Aspiration
Turbocharged-aftercooled
Emissions
IMO III emissions certified (SCR required)
Stroke
6.38in
Rotation
Counterclockwise from flywheel end
Displacement
1959in³
Configuration
Vee 12, 4-stroke-cycle diesel
Bore
5.71in
Cooling
Heat exchanger or keel cooled
Flywheel Housing
SAE No. 0 with SAE No. 18 flywheel (136 teeth)
Governor
Electronic (A5 ECM)
Oil Change Interval
750 hrs - deep pan
Rated Engine Speed
1500 rpm
Refill Capacity
Lube Oil System w/ oil filter change: 146 L (38.5 gal) - deep pan

Dimensions & Weights

Maximum Width
57.3in
Maximum Length
89.8in
Maximum Height
63.5in
Maximum Engine Dry Weight
7160lb
Minimum Engine Dry Weight
6950lb
Minimum Height
59.3in
Minimum Length
83.9in
Minimum Width
57.1in

Clean Emissions Module (CEM) - Dimensions

6 Brick U-Flow - Height
23.5in
6 Brick U-Flow - Length
85in
6 Brick U-Flow - Weight
1235lb
6 Brick U-Flow - Width
56.9in
6 Brick Z-Flow - Height
23.5in
6 Brick Z-Flow - Length
147.7in
6 Brick Z-Flow - Weight
1246lb
6 Brick Z-Flow - Width
43.5in
Dosing Cabinet - Height
22.8in
Dosing Cabinet - Length
37.4in
Dosing Cabinet - Weight
209lb
Dosing Cabinet - Width
18.8in

Emissions

Utilizes SCR Technology to enable IMO III emission regulations compliance while lowering operational costs

Control Strategy

Utilizes closed loop air assisted DEF dosing control strategy that delivers: Highest efficiency mixing and control to lower operational costs; Extends emissions useful life; Ensures compliance; Flexible to urea quality

Fuel System

Enhanced control of fuel injection optimized through crank timing and the A5 ECM technology

Power Reserve

Industry leading power reserve

Certifications

Wide range of available Marine Society certifications

Warranty

Industry-leading warranty coverage for factory packaged components

Service

Global dealer network for service in any location

Standard Equipment:

Optional Equipment:

    Alarm And Protection
    • MECP I control panel
    • MECP III control panel with Cat® Alarm and Protection System
    Exhaust System
    • Water-in-fuel and exhaust temperature sensors
    • Muffler
    Charging System
    • Charging alternator
    Fuel System
    • Manual or electric fuel priming pump
    • Fuel cooler
    Lube System
    • Duplex oil filters
    Power Take-offs
    • Front drives including stub shaft and pump drive
    • Rear SAE A or B pump drives
    Starting System
    • Starting motors – air, electric or redundant