302.7D CR Mini Hydraulic Excavator

302.7D CR Mini Hydraulic Excavator

PDF Print Share

Engine

Net Power
20.7HP
Engine Model
Yanmar 3TNV76
Gross Power
24.3HP
Displacement
68in³
Rated Net Power - ISO 9249
20.7HP
Emissions
Meets U.S. EPA Tier 4 Final/EU Stage V emission standards.
Note
Engine meets U.S. EPA Tier 4 Final/EU Stage V emission standards.

Weights

Operating Weight
6239lb
Operating Weight - With Cab
6239lb
Operating Weight - With Canopy
6034lb

Dimensions

Maximum Digging Depth
2544/2744 mm (8 ft 4 in/9 ft 0 in)
Maximum Vertical Dig Depth
1962/2152 mm (6 ft 5 in/7 ft 1 in)
Minimum Front Linkage Swing Radius
21in
Maximum Reach - Ground Level
4481/4681 (14 ft 8 in/15 ft 5 in)
Maximum Reach
4613/4805 mm (15 ft 1 in/15 ft 10 in)
Maximum Dumping Height
2840/2970 mm (9 ft 4 in/9 ft 8 in)
Maximum Dozer Lift Height
15in
Maximum Dozer Dig Depth
16in
Maximum Dig Height
4170/4300 mm (13 ft 8 in/14 ft 1 in)
Length - Undercarriage
79in
Boom Swing Angle - Right
50°
Height
7.9ft
Tail Swing Radius
30in
Boom Swing Angle - Left
75°
Track Width
30in
Transport Length - Arm Lowered
14ft
Width
5.15ft

Hydraulic System

Operating Pressure - Equipment
3263psi
Operating Pressure - Travel
3263psi
Operating Pressure - Swing
2987psi
Pump Flow at 2,500 rpm
23.6gal/min
Maximum Stick Force - Standard/Long
15.4 kN/13.6 kN (3,462 lbf/3,057 lbf)
Maximum Bucket Force
5058lb
Auxiliary Circuits - Secondary
30.8 L/min at 206 bar (8.1 gal/min at 2,988 psi)
Auxiliary Circuits - Primary
52.2 L/min at 225 bar (13.8 gal/min at 3,263 psi)

Blade

Width
61.9in
Height
11.4in
Dig Depth
16.5in
Lift Height
15in

Travel System

Gradeability
30°/58%
Travel Speed
2.1 km/h/3.8 km/h (1.30 mph/2.36 mph)

Service Refill Capacities

Hydraulic Tank Capacity
7gal (US)
Fuel Tank Capacity
9.3gal (US)

Lift Capacity at Ground Level with Cab - Lift Point Radius: 2.5 m (98.43 in)

Note
* The loads listed are in compliance with hydraulic excavator lift capacity rating standard ISO 10567:2007 and they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. The excavator bucket weight is not included here.
Standard Stick: Blade Down - Front
992 kg (2,187 lb)*
Long Stick and Optional Counterweight: Blade Down - Front
985 kg (2,172 lb)*
Long Stick and Optional Counterweight: Blade Down - Side
521 kg (1,149 lb)
Standard Stick: Blade Down - Side
456 kg (1,005 lb)

Lift Capacity at Ground Level with Cab - Lift Point Radius: 3.0 m (118.11 in)

Long Stick and Optional Counterweight: Blade Down - Front
739 kg (1,630 lb)*
Standard Stick: Blade Down - Side
351 kg (774 lb)
Standard Stick: Blade Down - Front
750 kg (1,654 lb)*
Long Stick and Optional Counterweight: Blade Down - Side
402 kg (886 lb)
Note
* The loads listed are in compliance with hydraulic excavator lift capacity rating standard ISO 10567:2007 and they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. The excavator bucket weight is not included here.

Lift Capacity at Ground Level with Cab - Lift Point Radius: 3.5 m (137.80 in)

Standard Stick: Blade Down - Front
597 kg (1,316 lb)*
Note
* The loads listed are in compliance with hydraulic excavator lift capacity rating standard ISO 10567:2007 and they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. The excavator bucket weight is not included here.
Standard Stick: Blade Down - Side
283 kg (623 lb)
Long Stick and Optional Counterweight: Blade Down - Front
591 kg (1,303 lb)*
Long Stick and Optional Counterweight: Blade Down - Side
322 kg (711 lb)

Lift Capacity at Ground Level with Cab - Lift Point Radius: Maximum

Standard Stick: Blade Down - Side
252 kg (556 lb)
Long Stick and Optional Counterweight: Blade Down - Side
267 kg (588 lb)
Long Stick and Optional Counterweight: Blade Down - Front
478 kg (1,054 lb)*
Standard Stick: Blade Down - Front
517 kg (1,141 lb)*
Note
* The loads listed are in compliance with hydraulic excavator lift capacity rating standard ISO 10567:2007 and they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. The excavator bucket weight is not included here.

Compact Dimensions: Reduced damage – Operator confidence – Increased productivity

Compact Radius

Configured without the additional counterweight the 302.7D CR is a true zero tail swing machine with the upper body staying within the width of the undercarriage during rotation. This enables the operator to work within confined areas and concentrate on the work being performed without having to worry about the back of the machine.

Transport Weight

The 302.7D CR is designed with a transport weight below 2.7 tonnes (6,000 lb) with cab fitted.

This allows lower trailer transportation costs using a standard passenger vehicle (subject to national restrictions).

Additional Counterweight

An optional additional weight increases the machines lifting capability with only a small addition to the overhang.

An optional additional counterweight increases the machines lifting capacity with only a small addition to the overhang.

(This counterweight is fitted as standard for North America and Australia)

Performance and Durability: Powerful hydraulics – Robust construction – Work tool ready

Auxiliary Hydraulics as Standard Fit

Machine is ‘ready to work.’ Hammer and two way lines complete with quick disconnect fittings are standard. Connections are located close to the tool to reduce hose lengths and any potential damage.

Additional lines options are available to further increase machine versatility.

Stick and bucket cylinder hoses are protected by routing them through the boom.

100% Pilot Controls

Delivers excellent machine control and lifetime ‘as new’ performance eliminating the need for linkage and cable maintenance.

Automatic Swing Lock

Safe transportation of the machine is aided by the Cat automatic swing lock which locks the machines upper body in place when the control console is raised or the engine is stopped.

Thumb Ready Stick (North American Builds)

Machine is configured with brackets and relief valves for simple and cost effective mounting of a hydraulic thumb.

Dozer Float

Ground levelling and finishing applications are fast and easier with the dozer float function engaged making site clean-up much more efficient.

User Friendly Operation: Comfortable productivity

Cab Comfort

The Cat® 302.7D CR gives the operator a large comfortable space in which to work. The ergonomic control layout, travel pedals and adjustable wrist rests are engineered to minimize operator fatigue and increase productivity.

Simultaneous Operation

Both machine upper body swing and boom offset can be controlled simultaneously for faster machine positioning and object handling.

Adjustable Flow Control

Machines configured with proportional auxiliary hydraulics include adjustable hydraulic flow control for even greater tool control. Especially useful with tools such as angling buckets.

Split Front Window

The lower front window section slides into the upper section frame. Both sections are then raised and stored in the roof using a gas assisted mechanism.

This allows the operator to position the front window to suit their visibility and ventilation requirements with easy storage.

Serviceability/Maintenance: Easy access for both maintenance and daily inspection

Pivot Bushing

Steel bushings are fitted on all front linkage pivot points including the swing casting, boom, stick and bucket. Designed for long life and easy replacement.

Maintenance Access

Removable covers in the cab and at the rear of the machine provide easy access to hydraulic system components.

Side Mounted Engine

All daily service points are easily accessed through the large side cover. The engine position also reduces heat and noise transfer into the operator station (cab).

Customer Support: Low operating costs with excellent services and options

Customer Support

Product supported through the Cat dealer and worldwide parts network aimed at minimizing downtime.

  • Finance options
  • Warranty options
  • Maintenance contracts

Help and advice in product and option selection to maximize efficiency and operating profitability

Work Tools

A range of tools is available to take advantage of the machines versatility. All tools are matched to the machine to optimize performance and deliver excellent value through high productivity and long life.

Standard Equipment:

Optional Equipment:

    Optional Equipment
    • Additional hydraulic circuit diverted from bucket cylinder
    • Auto idle (Standard in North America)
    • Bio oil
    • Boom check valve
    • Cab, radio ready with FOPS ISO 10262 (Level 1), Tip Over Protection (TOPS) ISO 12117, heater/defroster, interior light and windscreen wiper
    • Custom color paint
    • Ecology drain for engine oil
    • Ecology drain for hydraulic tank
    • Front screen guard for cab and canopy
    • Joystick mounted proportional auxiliary control
    • Mechanical quick coupler
    • Mirror pack
    • Rotating beacon
    • Suspension seat, fabric covered
    • Thumb ready stick (Standard in North America)