226D Skid Steer Loader
Engine
- Engine Model
- Cat C2.2 CRDI
- Net Flywheel Power
- 65.8HP
- Gross Power - SAE J1995
- 67.1HP
- Net Power - SAE 1349
- 65.8HP
- Displacement
- 134.3in³
- Stroke
- 3.9in
- Bore
- 3.3in
- Peak Torque - 1,500 rpm - SAE J1995
- 153ft·lbf
- Net Power - ISO 9249
- 66.5HP
Operating Specifications
- Rated Operating Capacity
- 1550lb
- Tipping Load
- 3100lb
- Breakout Force - Tilt Cylinder
- 3983lb
- Rated Operating Capacity with Optional Counterweight
- 1650lb
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quic
Weights
- Operating Weight
- 5705lb
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quic
Dimensions
- Wheel Base
- 41.5in
- Height - Top of Cab
- 79.8in
- Vehicle Width over Tires
- 58.9in
- Ground Clearance
- 6.9in
- Departure Angle
- 27.9°
- Maximum Dump Angle
- 46.7°
- Turning Radius from Center - Machine Rear
- 59.6in
- Turning Radius from Center - Coupler
- 43.5in
- Turning Radius from Center - Bucket
- 77.8in
- Rack Back Angle - Maximum Height
- 88.9°
- Maximum Reach - With Arms Parallel to Ground
- 50.7in
- Maximum Overall Height
- 143.8in
- Length - Without Bucket
- 99.4in
- Length - With Bucket on Ground
- 127.3in
- Clearance at Maximum Lift and Dump
- 81.8in
- Bucket Pin Height - Maximum Lift
- 110.9in
- Bucket Pin Height - Carry Position
- 8.5in
- Reach - Maximum Lift/Dump
- 21in
- Bumper Overhang - Behind Rear Axle
- 35.2in
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quic
Cab
- ROPS
- ISO 3471:2008
- FOPS
- ISO 3449:2005 Level I
- FOPS Level II
- ISO 3449:2005 Level II
Service Refill Capacities
- Cooling System
- 3.2gal (US)
- Engine Crankcase
- 2.6gal (US)
- Fuel Tank
- 15.1gal (US)
- Hydraulic System
- 11.9gal (US)
- Hydraulic Tank
- 9gal (US)
- Chain Box - Each Side
- 1.8gal (US)
Power Train
- Travel Speed - Forward or Reverse - One Speed
- 7.6mile/h
- Travel Speed - Forward or Reverse - Two Speed Option
- 11.1mile/h
Hydraulic System
- Hydraulic Flow - Standard - Loader Hydraulic Pressure
- 3336psi
- Hydraulic Flow - Standard - Loader Hydraulic Flow
- 18gal/min
- Hydraulic Flow - Standard - Hydraulic Power (Calculated)
- 35.5HP
- Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure
- 3336psi
- Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow
- 26gal/min
- Hydraulic Flow - High Flow - Hydraulic Power (Calculated)
- 50.9HP
Noise Level
- Inside Cab*
- 83dB(A)
- Outside Cab**
- 102dB(A)
- Note (1)
- Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
- Note (2)
- *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee
- Note (3)
- **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Air Conditioning System
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Comfortable Cab
Industry leading sealed and pressurized cab option provides a cleaner and quieter operating environment with excellent work tool visibility. Available high-back, heated, air ride seat with seat mounted adjustable joystick controls makes the D Series the industry leader in operator comfort.
Advanced Display
Maximize machine capability and control with optional Advanced Display providing on-screen adjustments for implement response, hystat response and creep control. Also features multi-language functionality with customizable layouts, security system and rearview camera.
Powerful Performance
High performance power train provides maximum performance and production capability through the Electronic Torque Management system, optional two speed travel and an electronic hand/foot throttle with decel pedal capability. High Flow hydraulic system is available for applications that demand maximum hydraulic work tool performance. Electronically controlled Cat C2.2 engine provides high horsepower and torque while meeting U.S. EPA Tier 4 Final (EU Stage IIIB) emission standards. Cat “Intelligent Leveling” system (ILEV) provides industry leading technology, integration and optional features such as dual direction self level, work tool return to dig and work tool positioner.
Ride Control
Speed Sensitive Ride Control option improves operation on rough terrain, enabling better load retention, increased productivity and greater operator comfort.
Outstanding Versatility
Broad range of performance matched Cat Work Tools make the Cat Skid Steer Loader the most versatile machine on the job site.
Easy Service
Ground level access to all daily service and routine maintenance points helps reduce machine downtime for greater productivity.