TL1055D Telehandler
The TL1055D is precision engineered to handle any task, offering stability, maneuverability, speed and power in any application.
Operating Specifications
- Rated Load Capacity
- 10000lb
- Maximum Forward Reach
- 42ft
- Top Travel Speed
- 20.5mile/h
- Maximum Lift Height (o/r Down)
- 54.9ft
- Frame Leveling
- 10°
- Capacity at Maximum Height (o/r Down)
- 5000lb
- Capacity at Maximum Reach (o/r Down)
- 2500lb
- Turning Radius - Over Tires
- 14.1ft
- Drawbar Pull - Loaded
- 25605lbf
Engine
- Engine Model
- Cat® C4.4 ACERT™*
- Gross Power - Basic
- 142.1HP
- Note
- *Meets U.S. EPA Tier 4 Final emission standards.
Tires
- Standard
- 400/75-28 Duraforce
- Optional
- 400/75-28 Foam Filled; 14.00-24 Solid; 14.00 × 24 16PR; 14.00 × 24 12PR Foam Filled
Service Refill Capacities
- Fuel Tank
- 38gal (US)
- Diesel Exhaust Fluid (DEF) Tank
- 5.7gal (US)
- Hydraulic System
- 49gal (US)
Hydraulic System
- Pump Type
- Variable displacement load sensing axial piston pump
- Note
- Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components.
- System Operating Pressure
- 3771psi
- Auxiliary Hydraulic Pressure
- 3307psi
- Auxiliary Hydraulic Flow
- 25gal/min
Boom Performance
- Boom Up
- 15s
- Boom Down
- 13s
- Tele In
- 16.3s
- Tele Out
- 18.5s
Braking System
- Service Brakes
- Inboard wet disc brakes on front and rear axles
- Parking Brakes
- Wet disc, spring applied hydraulic release on front axle
Weights
- Operating Weight
- 31879lb
Axles
- Types (1)
- Trunnion mounted planetary 55 degree steer axles.
- Types (2)
- High bias limited slip differential on front axle.
Transmission Speeds
- Forward
- 4 speed
- Reverse
- 3 speed
Work Tools
- Hydraulic IT Coupler
- Includes Auxiliary Electrics
- Pallet Forks - Option 1
- [2] 1525 mm, 60 mm × 150 mm ([2] 60 in, 2.36 in × 6 in)
- Pallet Forks - Option 2
- [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
- Lumber Forks - Option 1
- [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
- Lumber Forks - Option 2
- [2] 1829 mm, 50 mm × 150 mm ([2] 72 in, 2 in × 6 in)
- Fork Extensions*
- 90in
- Cubing Forks
- [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
- Carriages - Standard Tilt
- 50in
- Carriages - Wide Tilt
- 72in
- Carriages - Side Shift
- 48in
- Carriages - Standard Rotate
- 50in
- Carriages - Wide Rotate
- 72in
- Carriages - Swing
- 100°, 1829 mm, 4536 kg Capacity, 2268 kg Swung (100°, 72 in, 10,000 lb Capacity, 5,000 lb Swung)
- Carriages - Dual Positioning
- 50in
- Note
- *For use with 1829 mm (72 in) Lumber Forks.