615C Series II Elevating Scraper
Engine
- Flywheel Power - Tractor/Scraper
- 197 kW (265 hp)
- Tractor Engine
- Cat® 3306
- Net Power - Gears 1-2
- 265HP
- Net Power - Gears 3-8
- 265HP
- Gross Power - Gears 1-2
- 279HP
- Bore
- 4.75in
- Stroke
- 6in
- Displacement
- 638in³
- Net Power
- 265HP
Scraper Bowl
- Scraper Capacity - Heaped
- 17yd³
- Rated Load
- 40800lb
- Capacity - Struck
- 14yd³
- Depth of Cut - Maximum
- 15.8in
- Width - Cut - To Router Bits
- 9.5in
- Ground Clearance - Maximum
- 17.3in
- Depth of Spread - Maximum
- 16.3in
Transmission
- Top Speed - Loaded
- 27.6mile/h
- 1 Forward
- 2.2mile/h
- 2 Forward
- 3.6mile/h
- 3 Forward
- 6.2mile/h
- 4 Forward
- 10.2mile/h
- 5 Forward
- 17.5mile/h
- 6 Forward
- 27.6mile/h
Weights
- Total Operating - Empty
- 56450lb
- Front Axle
- 37250lb
- Rear Axle
- 19200lb
- Total Operating - Loaded
- 97250lb
- Front Axle Weight - Loaded
- 50010lb
- Rear Axle - Weight - Loaded
- 47240lb
Elevator
- Length - Overall
- 146.5in
- Width - Flight Face
- 6.89in
- Length - Flights
- 77.7in
- Spacing of Flights
- 16.22in
- Number of Flights
- 18
Dimensions
- Height - Overall Shipping
- 141.3in
- Length - Overall Machine
- 457in
- Width - Overall Machine
- 120in
- Height - Top of Cab
- 127in
- Height - Scraper Blade Maximum
- 19.5in
- Width - Inside of Bowl
- 103in
- Width - Rear Tire Center Lines
- 83.25in
- Width - Outside Rear Tires
- 120in
- Front of Tractor to Front Axle
- 116.75in
- Wheel Base
- 274.75in
- Rear Axle - Rear of Machine
- 55.9in
Steering
- Width - 180° Turn
- 31.5ft
- Steering Angle - Right
- 90 Degrees
- Steering Angle - Left
- 85 Degrees
- Hydraulic Output
- 50.99gal/min
Service Refill Capacities
- Fuel Tank
- 105gal (US)
- Crankcase
- 6gal (US)
- Transmission
- 9.5gal (US)
- Differential
- 16gal (US)
- Final Drive - Each
- 16gal (US)
- Cooling System
- 17gal (US)
- Hydraulic Reservoir
- 42gal (US)
Hydraulics
- Bowl Cylinder Bore
- 5in
- Bowl Cylinder Stroke
- 22.6in
- Floor Cylinder Bore
- 5.5in
- Floor Cylinder Stroke
- 26.8in
- Ejector Cylinder Bore
- 4.3in
- Ejector Cylinder Stroke
- 43in
- Steering Circuit
- 51gal/min
- Scraper Circuit
- 36gal/min
- Relief Valve - Steering Circuit
- 1000.76psi
- Compensator Settings - Elevator Circuit
- 1000.76psi
Standards
- Brakes
- Meets SAE J1473 & ISO 3450 stds
Caterpillar 3306 Engine
- Design
The Caterpillar 3306 engine has a four stroke cycle design for long, effective power strokes and more complete fuel consumption.
Elevator Mechanism/Bowl
- Performance
The two-speed elevator drive and high hydraulic horsepower provide maximum loading performance over a wide range of material conditions.
- Elevator Flights
Elevator flights break up the material during the loading and unloading process making the fill area workload reduced.
- Material Ejection
Retracting floor, bulldozer ejector and reversible elevator provide clean, quick material ejection.
- Bowl Design
The low-profile bowl design lets loaded material flow to the rear of the bowl letting the new material enter with less resistance.
- Cutting Edge
The wide cutting edge allows a large volume of material to enter the bowl.
- Productivity
The angled top plate on ejector helps retain loads for maximum productivity and minimum haul road spillage.
- Durability and Reliability
The retractable floor is a roller mounted design that reduces the chance of binding.
- Serviceability
Segmented elevator drive sprockets allow exchange without removing the chain.
Cutting Edges
- Design
Reversibility extends the life and lowers your G.E.T. cost.
Operator's Compartment
- Visibility
The cutting edge enhances finish work capability and overall loading and dumping effectiveness.
- Seat
The multi-adjustable seat with air/hydraulic suspension offers shift-long comfort.
- Steering Wheel
The tilt/telescopic steering wheel enhances operational comfort and allows easier entrance and exit.
- Maneuverability
The modulated, variable-flow steering makes maneuverability precise and low effort.
- Controls
The controls are easy to reach with low operational effort.
- Vibration
The resiliently mounted engine and cab/canopy minimize vibration of the operator's compartment.
- Rollover Protective Structure (ROPS)
The canopy is included in the standard arrangement.
- Electronic Monitoring System
The Electronic Monitoring System (EMS) has three stages of alert notifying the operator of varying degrees of required action to avoid possible damage or failure to components/systems.
Serviceability
- Diagnostic Connector
The diagnostic connector (located in the cab) with the aid of a service tool, allows quick analysis of the starting and charging system.
- Wiring
With the increasing use of electronics in today's machines, the quality of materials and design is having a greater effect on machine availability.
- Final Drives
Outboard, planetary final drives can be removed independently of wheel mounting and brakes.
- Check Points
Hydraulic pressures can be obtained quickly and easily.
- Ground Level Access
Transmission fill and check, hydraulic fill and check, manual fuel check (gauge in cab) fill and a majority of grease points can be obtained quickly and easily from ground level access.
- Maintenance
There's maintenance platform access to the engine oil check and fill, engine coolant level check and fill, front brake reservoir, hydraulic system filter and the secondary fuel filter.
Customer Support
- Parts
Time spent waiting on your parts directly affects your bottom line!
- Service
Whether in the dealer's fully equipped shop or in the field, trained service personnel using the latest technology and tooling will keep your equipment working.
- Components
Exchange components for quick, yet cost effective repairs with minimal downtime.
- Machine Management
Cat dealers help manage equipment investments with vehicle systems analysis to match the right machine to your job conditions and effective maintenance programs.
- Literature
Extensive operation and maintenance manuals, parts manuals and other support information help you get the full value out of your equipment investment.
- Financing/Leasing
Through CAT financial or an alternate source, your dealer can arrange attractive financing or leasing on the entire line of Cat equipment.